TIS 2320-2009 Heavy motor vehicle equipped with positive ignition engines fuelled with natural gas or liquefied petroleum gas safety requirement emission from engine level 1《燃用天然气或.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF L81-312-1978 Receptacles on aircraft for hoisting devices Metric ISO thread profile and BNAE tolerances (rech ) 《飞机上提升装置用插座 ISO米制螺纹牙形和BNAE公差》.pdf

NF L81-313-1978 Aircraft receptacles for jacking pads and mooring rings Metric ISO thread profile and BNAE tolerances (rech ) 《飞机千斤顶支板和系留环用插座 ISO米制螺纹牙形和BNAE公差》.pdf

NF L81-322-1978 Aircraft receptacles for hoisting devices Metric ISO thread profile and tolerances 《起重装置用飞机承座 米制ISO螺纹牙形和公差》.pdf

NF L81-323 A1-1980 《千斤顶垫和系留环用飞机承座 米制ISO螺纹牙形和公差 修改件1》.pdf

NF L81-323-1978 Aircraft receptacles for jacking pads and mooring rings metric ISO thread profile and tolerances 《千斤顶垫和系留环用飞机承座 米制ISO螺纹牙形和公差》.pdf

NF L81-410-1974 Openings for round access door 《圆形通道门打开机构》.pdf

NF L81-415-1982 Engine nacelle fire extinguisher apertures and doors 《发动机整流罩灭火器孔口和口盖》.pdf

NF L81-450-1954 Section of trimming for aperture edges (rech )《孔径边切削部分(rech )》.pdf

NF L82-610-1953 Control lever for operating undercarriage (rech ) 《操纵起落架用控制杆(rech )》.pdf