TIS 2512-2010 Plastics determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory scale test《塑料 在实验室试验中模拟堆肥处理条件下测定塑料的分.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24558-1981 Sheet stamping dies Guide bushes for guide posts with flute Design and dimensions《板材冲压用压模 阶梯式导向柱用导向衬套 结构及尺寸》.pdf

GOST 24559-1981 Sheet stamping dies Check spring rings Design and dimensions《板材冲压用压模 弹簧锁紧环 结构及尺寸》.pdf

GOST 24560-1981 Sheet stamping dies Check rings for guide posts with flute Design and dimensions《板材冲压用压模 导向阶梯式柱用锁紧环 结构及尺寸》.pdf

GOST 24561-1981 Sheet stamping dies Middle band rings for guide posts with flute Design and dimensions《板材冲压用压模 导向阶梯式柱用中间环 结构及尺寸》.pdf

GOST 24562-1981 Sheet stamping dies Straps for guide bushes Design and dimensions《板材冲压用压模 导向套用夹子 结构及尺寸》.pdf

GOST 24566-1986 Flat plug-in connectors Basic dimensions technical requirements and test methods《扁平插入式连接器 基本尺寸 技术要求和试验方法》.pdf

GOST 24567-1981 Pneumatic tyres Method for measurement of effective rolled circumference in road tests《充气轮胎 有效滚压圆周的测量方法》.pdf

GOST 24568-1981 Magnetic chucks Specifications《磁性卡盘 技术条件》.pdf

GOST 24569-1981 Occupational safety standards system Steam and hot-water boilers Marking《蒸汽和热水锅炉 标志》.pdf