TIS 365-1981 Standard for soft solder bars and ingots.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 1043G-2017 SAFETY WIRE HOLES HEX FITTING LOCATION OF DESIGN STANDARD.pdf

SAE AS 1046C-2006 Minimum Standard for Portable Gaseous Oxygen Equipment《便携式气态氧设备的最低标准》.pdf

SAE AS 1055E-2017 Fire Testing of Flexible Hose Tube Assemblies Coils Fittings and Similar System Components.pdf

SAE AS 1065A-2011 Quality and Serviceability Requirements for Aircraft Cylinder Assemblies Charged with Aviators Breathing Oxygen《充有飞行员呼吸氧气的航天器气缸总成的质量和适用性要求》.pdf

SAE AS 1072E-1997 Sleeve Hose Assembly Fire Protection《消防用软管总成套筒》.pdf

SAE AS 1073A-1989 SLEEVE HOSE ASSEMBLY HEAT SHRINKABLE《可热收缩的套管软管组件 》.pdf

SAE AS 107E-2013 Surface Finish (RMS)《表面抛光(RMS)》.pdf

SAE AS 1097B-1994 SEAL RING 37 LARED TUBE FITTING END《密封环用37弯头的扩口管配件端部》.pdf

SAE AS 1098B-1995 FITTING END FLARED TUBE FOR SEAL RING STANDARD DIMENSIONS FOR DESIGN STANDARD《密封环扩口管接头末端标准尺寸的设计标准》.pdf