TIS 695-1987 Standard for fire hose collapsible hose《消防软管标准 可折叠软管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 22080-1976 Shouldered shanks of injection moulds Design and dimensions《压力热塑铸造用压模带肩模柄 结构及尺寸》.pdf

GOST 22081-1976 Flange-blanks of injection moulds Design and dimensions《压力热塑铸造用压模法兰坯料 结构及尺寸》.pdf

GOST 22082-1976 Injection mould bases detail-blanks and details of injection moulds Specifications《压力热塑铸造用带起出器板和起箱板压模坯料 技术条件》.pdf

GOST 22087-1976 End face milling cutters with mechanical fastening of pentahedral carbide blades Construction and dimensions《机械夹固的五面硬质合金端面立铣刀 结构及尺寸》.pdf

GOST 22088-1976 End face milling cutters with mechanical fastening of round carbide blades Construction and dimensions《机械夹固的圆形硬质合金刀片端面立铣刀 结构及尺寸》.pdf

GOST 22090 1-1993 Dental rotary instruments Part 1 Steel and carbide burs《口腔科用的旋转工具 第一部分 钢及硬质合金牙钻》.pdf

GOST 22090 2-1993 Dental rotary instruments Part 2 Steel and carbide finishing burs《口腔科用的旋转工具 第二部分 最终处理用的钢及硬质合金牙钻》.pdf

GOST 22091 0-1984 X-ray devices General requirements for measuring of parameters《X射线仪 对参数测量的一般要求》.pdf

GOST 22091 1-1984 X-ray devices The methods of measuring of heater current and heater voltage《X射线仪 灯丝电流和电压测量方法》.pdf