TS 1094-1972 JET - FUEL RESISTANT CONCRETE JOINT SEA TjKR HOT - POURED EL AST1C TYPE《热浇注弹性型抗喷气燃料的混凝土接缝密封料》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 27185-2012 Cardiac rhythm management devices Symbols to be used with cardiac rhythm management device labels and information to be supplied General requirements《心节律管理设备 用于心节.pdf

BS ISO 27186-2013 Active implantable medical devices Four-pole connector system for implantable cardiac rhythm management devices Dimensional and test requirements《有源可植入医疗器械 可植入心节律.pdf

BS ISO 27205-2010 Fermented milk products - Bacterial starter cultures - Standard of identity《发酵牛奶制品 细菌发酵剂培养 一致性标准》.pdf

BS ISO 2721-2013 Photography Film-based cameras Automatic controls of exposure《摄影术 使用胶卷的照相机 曝光自动控制》.pdf

BS ISO 2725-1-2017 Assembly tools for screws and nuts Square drive sockets Hand-operated sockets《螺钉和螺母的装配工具 方形驱动套筒 手动套筒》.pdf

BS ISO 2725-2-2017 Assembly tools for screws and nuts Square drive sockets Machine-operated sockets ( impact )《螺钉和螺母的装配工具 方形驱动套筒 机动套筒 (“冲击”)》.pdf

BS ISO 2725-3-2017 Assembly tools for screws and nuts Square drive sockets Machine-operated sockets ( non-impact )《螺钉和螺母用装配工具 方形传动套筒 机用套筒(无冲击)》.pdf

BS ISO 27306-2016 Metallic materials Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components《金属材料 钢构件断裂评估CTOD断裂韧性损失校正约束方法》.pdf

BS ISO 27307-2015 Thermal spraying Evaluation of adhesion cohesion of thermal sprayed ceramic coatings by transverse scratch testing《热喷涂 采用横向划痕试验评估热喷涂陶瓷涂层的粘结性 凝聚性》.pdf