TS 1920-1975 ADIPATE ESTERS FOR INDUSTRIAL USE MEASUREMENT OF COLOUR AFTER HEAT TREATMENT《工业用己二酸酯 热处理后的色泽测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NAS 883-1982 Mirror Targets - Optical Tooling Front Surface and Plano- Parallel.pdf

AIA NAS 884-1982 Interface-Optical Tooling Non-Alignment Laser Head.pdf

AIA NAS 885-1982 Scales for Optical Tooling.pdf

AIA NAS 886-1982 Jig Transit and Jig Transit Squares for Optical Tooling.pdf

AIA NAS 887-1982 Theodolites for Optical Tooling.pdf

AIA NAS 888-1982 Sight Levels for Optical Tooling.pdf

AIA NAS 889-1982 Optical Squares for Optical Tooling.pdf

AIA NAS 897-1995 Reamers Chucking 0.0469 Inch Thru 1.5000 Inches (Rev 1).pdf

AIA NAS 899-1982 Wire Harness Assembly Machine Computerized Numerical Control.pdf