TS 2096-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Q SEALING《电子器件和电子设备测试基本环境测试程序　Q：密封》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS-ISO 1891-1982 Bolts screws nuts and accessories - Terminol- ogy and nomenclature《螺栓；螺丝；螺母和配件 术语和名称》.pdf

SIS SS-ISO 1919-1989 Road vehicles M14 x 1 25 spark-plugs with flat seating and their cylinder head housing《道路车辆 M14x1 25平座冲击火花塞和汽缸盖安装座》.pdf

SIS SS-ISO 1925-1992 Mechanical vibration - Balancing - Vocabulary《机械振动 平衡 术语》.pdf

SIS SS-ISO 1957-1989 Machine-made textile floor coverings Sampling and cutting specimens for physical tests《机制纺织地毯 用于物理试验的采样和切割样品》.pdf

SIS SS-ISO 1984-0-1992 Test conditions for milling machines with table of fixed height with horizontal or vertical spindle Part 0 General introduction《有固定高度、水平或纵向主轴的铣床测试条件 第0部分：概述.pdf

SIS SS-ISO 1984-1992 Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle Testing of accuracy《有固定高度、水平或纵向主轴的铣床验收条件 准确性测试》.pdf

SIS SS-ISO 1996-1986 Acoustics - Description and measurement of environmental noise《声学 环境噪音的描述和测量》.pdf

SIS SS-ISO 2009-1986 Slotted countersunk head screws (common head style) - Product grade A《开槽沉头螺钉（普通头型）A级产品》.pdf

SIS SS-ISO 2010-1986 Slotted raised countersunk head screws (common head style) - Product grade A《开槽半沉头螺钉（普通头型）A级产品》.pdf