TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH《测量和评定表面粗糙度几何参数的仪器和装置分类》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS51517 REV A-1979 CROSS TUBE 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式十字管》.pdf

DLA MS51518 REV A NOTICE 1-1999 PLUG MACHINE THREAD 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式机用螺纹插塞》.pdf

DLA MS51518 REV A VALID NOTICE 2-2013 Plug Machine Thread 37 Degrees Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 .pdf

DLA MS51518 REV A-1979 PLUG MACHINE THREAD 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式机用螺纹插塞》.pdf

DLA MS51519 REV A NOTICE 1-1999 NIPPLE TUBE LARGE HEX FOR USE WITH O-RING 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式 供O型圈使用 大六边形管螺纹接套》.pdf

DLA MS51519 REV A VALID NOTICE 2-2013 Nipple Tube Large Hex for Use with O Ring 37 Degrees Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J.pdf

DLA MS51519 REV A-1979 NIPPLE TUBE LARGE HEX FOR USE WITH O-RING 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式 供O型圈使用 大六边形管螺纹接套》.pdf

DLA MS51520 REV A (2)-1998 NIPPLE TUBE BULKHEAD 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式管螺纹接套舱壁》.pdf

DLA MS51520 REV A NOTICE 1-1999 NIPPLE TUBE BULKHEAD 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式管螺纹接套舱壁》.pdf