TS 2251-1976 EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT《环氧化合物 环氧当量的测定》.pdf

相关资源

GB T 4612-1984 环氧化合物环氧当量的测定.pdf

JUS G S1 811-1990 Plastics Epoxide compounds Determination of epoxide equivalent《塑料 环氧化合物 环氧当量测定》.pdf

SIS SS-ISO 3001-1988 Plastics Epoxide compounds Deter- mination of epoxide equivalent《塑料 环氧化合物 环氧当量的测定》.pdf

猜你喜欢

FORD WSK-M4D642-A3-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED REDUCED MOISTURE ABSORPTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D.pdf

FORD WSK-M4D643-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED MELT FLOW RATE 4 - 7 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为4-7的40%矿物填充的聚丙烯(PP)均聚物 与标准FORD WSS-M99.pdf

FORD WSK-M4D643-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED MELT FLOW RATE 1 - 3 5 TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D643-A1)《40%矿物填充熔态流动率为1-.pdf

FORD WSK-M4D644-A-2004 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED CONTROLLED RHEOLOGY (CR) GRADE TO BE USED WITH FORD WSS-M99P1111-A 《流变性能(CR)控制级40%矿物填充的聚丙烯(PP)均聚物 与标准FOR.pdf

FORD WSK-M4D644-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL MIX FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯均聚物 40%矿物混合填充模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D644-A4-2011 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%矿物混合填充高热量聚丙烯(PP)均聚物模塑材料 与福特WSS-M.pdf

FORD WSK-M4D645-A-2009 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯（PE）高密度成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D646-A-2010 POLYVINYL CHLORIDE (PVC) RIGID MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯（PVC）刚性成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D646-A2-2010 POLYVINYL CHLORIDE (PVC) 80 D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为80 D的聚氯乙烯（PVC）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf