TS 2401-1976 PLATICS AND EBON TE DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD《塑料和硬化橡胶 硬度的测定 球形压痕法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 15749-2-2004 Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage drain piping for gravity system《船舶和海洋技术 船舶和海上结构物的排水系统 自流输送系.pdf

BS EN ISO 15749-3-2004 Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage drain piping for vacuum system《船舶和海洋技术 船舶和海上结构物的排水系统 真空系统用卫.pdf

BS EN ISO 15749-4-2004 Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage sewage disposal pipes《船舶和海洋技术 船舶和海上结构物的排水系统 卫生排水和污水处理管》.pdf

BS EN ISO 15749-5-2004 Ships and marine technology - Drainage systems on ships and marine structures - Drainage of decks cargo spaces and swimming pools《船舶和海洋技术 船舶和海上结构物的排水系统 甲板、货舱.pdf

BS EN ISO 15750-1-2008 Packaging - Steel drums - Part 1 Removable head (open head) ndrums with a minimum total capacity of 208 l 210 l and 216 5 l《包装 钢制鼓形桶 最小总容量为208L、210L和216 5L的可.pdf

BS EN ISO 15750-2-2008 Packaging - Steel drums - Part 2 Non-removable head (tight nhead) drums with a minimum total capacity of 212 l 216 5 l and n230 l《包装 钢制鼓形桶 最小总容量为121L、216 5L和.pdf

BS EN ISO 15752-2010 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety《眼科仪器 内发光器 光辐射安全的基本要求和试验方法》.pdf

BS EN ISO 15753-2016 Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons《动植物油脂 多环芳烃测定》.pdf

BS EN ISO 15755-2000 Paper and board - Estimation of contraries《纸和纸板 杂质估算》.pdf