TS 2771-1977 Ropes Three Or Four - Strand Manila And Sisal Required Characteristics《绳索 三股或四股马尼拉和剑麻特征》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 4060-2001 en Aerospace Series - Filler Rods and Filler Wires for Welding in Heat Resisting Alloys - Diameter 0 5 mm Less Than or Equal to D Less Than or Equal to 5 0 mm - Dimens.pdf

EN 4069-1996 en Aerospace Series - Nuts Hexagon Plain Reduced Height Reduced Across Flats in Heat Resisting Steel Passivated - Classification 600 MPa (at Ambient Temperature) 650.pdf

EN 407-2004 en Protective gloves against thermal risks (heat and or fire)《防热危害的手套(高温和 或火焰)》.pdf

EN 4071-2009 en Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in titanium alloy aluminium IVD coated - Classification 1 100 MPa (at ambie.pdf

EN 4072-2009 6875 Aerospace series - Screws 100 Degrees countersunk normal head offset cruciform recess close tolerance normal shank short thread in titanium alloy aluminium IVD co.pdf

EN 4072-2016 en Aerospace series - Screws 100 ountersunk normal head offset cruciform recess close tolerance shank short thread in titanium alloy aluminium IVD coated - Classificat.pdf

EN 4073-2009 2500 Aerospace series - Screws pan head six lobe recess coarse tolerance normal shank medium length thread in alloy steel cadmium plated - Classification 1 100 MPa (at.pdf

EN 4073-2016 en Aerospace series - Screws pan head hexalobular recess coarse tolerance shank medium length thread in alloy steel cadmium plated - Classification 1 100 MPa (at ambie.pdf

EN 4074-2009 en Aerospace series - Screws pan head six lobe recess coarse tolerance normal shank medium length thread in titanium alloy aluminium IVD coated - Classification 1 100 .pdf