TS 2800-1977 Oxygen For Industrial Use《工业用氧》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DS ISO 4190 6-1985 Lifts and service lifts (USA elevators and dumbwaiters) Part 6 Passenger lifts to be installed in residential buildings Planning and selection《电梯和服务电梯(美国 电梯和小型送货.pdf

DS ISO 4291-1990 Methods for the assessment of departure from roundness Measurement of variations in radius《圆度误差的评定方法 测量半径的变化》.pdf

DS ISO 4341-1981 Information processing Magnetic tape cassette and cartridge labelling and file structure for information interchange《信息处理 信息交换用的盒式磁带和磁带卡盘标号及文件结构》.pdf

DS ISO 4391-1989 Hydraulic fluid power Pumps motors and integral transmissions Parameter definitions and letter symbols《液压传动 泵、电动机和整体式传动装置 参数定义和文字符号》.pdf

DS ISO 4393-1989 Fluid power systems and components Cylinders Basic series of piston strokes《流体动力系统和组件 气缸 活塞行程的基本系列》.pdf

DS ISO 4394-1-1989 Fluid power systems and components Cylinder barrels Part 1 Requirements for steel tubes with specially finished bores《液压系统和元件 缸筒 第1部分 对特殊精加工内径的钢管的要求》.pdf

DS ISO 4519-1986 Electrodeposited metallic coatings and related finishes Sampling procedures for inspection by attributes《电镀金属层和有关的精加工 计数检查的取样程序》.pdf

DS ISO 4520-1986 Chromate conversion coatings on electroplated zinc and cadmium coatings《电镀锌和镉镀层上的铬酸盐转化镀层》.pdf

DS ISO 4536-1987 Metallic and non-organic coatings on metallic substrates Saline droplets corrosion test (SD test)《金属基材上的金属和非有机覆盖层 盐液滴腐蚀试验（SD试验）》.pdf