TS 283-1965 TESTING OF STEEL - DETERMINATION OF HOT CRACKING RESISTANCE OF F LLER METALS《钢测试 焊料热抗断裂测定　》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NAVY MS18299-1972 SHIPBOARD POWER DEMAND FACTORS 450 VOLT《舷侧马力需求因素450伏特》.pdf

NAVY MS18301 REV B-1992 HIGH PRESSURE DRAIN ORIFICE PLATES AND STRAINERS《高压排水孔口金属板和过滤器》.pdf

NAVY MS18307 REV B VALID NOTICE 1-1988 LATERALS FORGED STEEL SOCKET WELDING 3000 PSI AT 1000 DEG F (MAX ) STEAM SERVICE《气流供应3000PSI在1000度 F(最大)铸钢承插焊接侧部》.pdf

NAVY MS18307 REV B-1982 LATERALS FORGED STEEL SOCKET WELDING 3000 PSI AT 1000 DEG F (MAX ) STEAM SERVICE《气流供应3000PSI在1000度 F(最大)铸钢承插焊接侧部》.pdf

NAVY MS18308 VALID NOTICE 1-1991 ALLOY STEEL SOCKET WELDING FLANGES AND FLANGED NIPPLES 1 4 INCH AND 3 8 INCH 600 POUNDS PER SQUARE INCH AT 850 DEG F (MAXIMUM)《1 4英尺和3 8英尺600英镑每平方英.pdf

NAVY MS18308-1976 ALLOY STEEL SOCKET WELDING FLANGES AND FLANGED NIPPLES 1 4 INCH AND 3 8 INCH 600 POUNDS PER SQUARE INCH AT 850 DEG F (MAXIMUM)《1 4英尺和3 8英尺600英镑每平方英尺在850度F最大合金钢承插焊.pdf

NAVY MS19073 NOTICE 1-1998 BEARING ROLLER CYLINDRICAL SINGLE ROW OF ROLLERS TWO ROLLER RETAINING RIBS ON INNER RING TWO ROLLER RETAINING SNAP RINGS ON OUTER RING NON-LOCATING《外环浮动固.pdf

NAVY MS19073-1959 BEARING ROLLER CYLINDRICAL SINGLE ROW OF ROLLERS TWO ROLLER RETAINING RIBS ON INNER RING TWO ROLLER RETAINING SNAP RINGS ON OUTER RING NON-LOCATING《外环浮动固定开口环双滚筒内环.pdf

NAVY MS19074 NOTICE 1-1998 BEARING ROLLER CYLINDRICAL SINGLE ROW OF ROLLERS TWO ROLLER RETAINING RIBS ON INNER RING CYLINDRICAL OUTER RING NON-LOCATING《外环浮动固定开口环双滚筒内环双滚筒直线持续旋转轴单排滚筒.pdf