TS 293-1965 THE INTERNATIONAL SYSTEM OF UNITS AND OUANTITIES《国际单位制》.pdf

相关资源

JIS Z8203-2000 国际单位制(SI)及其组合形式和某些其它单位的使用推荐规程 (如无法正确阅读Foxit Reader打开).pdf

GB 3100-1993 国际单位制及其应用.pdf

GB T 9648-1988 国际单位制代码.pdf

STAS 9446-1985 USING OF MEASURE LEGAL UNITS OUTSIDE THE INTERNATIONAL SYSTEM OF UNITS《利用国际单位制以外的法定计量单位 》.pdf

STAS 10085 2-1986 MEASURE UNITS OUTSIDE INTERNATIONAL SYSTEM OF UNITS (SI) Conversion factors《国际单位制（SI）以外测量单位的换算系数 》.pdf

ASME B89 7 5-2006 Metrological Traceability of Dimensional Measurements to the SI Unit of Length《长度国际单位制尺寸测量的计量溯源(ASME 技术报告)》.pdf

CNS 10987-2007 International system of units《国际单位制(SI)》.pdf

GOST 20403-1975 Rubber Method for determination hardness in international units (30 to 100 IRHD)《橡胶 用国际单位制（3～100IRHD）的硬度测测定法》.pdf

ITU-T B 3 SPANISH-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)《国际单位制(SI)的使用》.pdf

ITU-T B 3-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)《国际单位制(SI)的使用》.pdf

猜你喜欢

GOST 13938 11-2014 Copper Method for determination of arsenic mass fraction《铜 砷质量分数的测定方法》.pdf

GOST 13938 13-1993 Copper Methods of determination of oxygen《铜 氧含量测定法》.pdf

GOST 13939-1990 Technical completing ribbons Specifications《工业用缎带 规范》.pdf

GOST 13940-1986 Retaining spring flat concentric rings for shafts and grooves for them Dimensions《外同心止推弹簧平垫圈及槽 结构及尺寸》.pdf

GOST 13941-1986 Retaining spring concentric rings for bores and grooves for them Dimensions《内同心止推弹簧平垫圈及槽 结构及尺寸》.pdf

GOST 13942-1986 Retaining spring flat eccentric rings for shafts and grooves for them Dimensions《轴用止动弹簧平偏心环及其槽 尺寸规格》.pdf

GOST 13943-1986 Retaining spring flat eccentric rings for bores and grooves for them Dimensions《内偏心止推弹簧平垫圈及槽 结构及尺寸》.pdf

GOST 13944-1986 Retaining spring flat rings and grooves for them Specifications《止动弹簧平环及其槽 规范》.pdf

GOST 13950-1991 Welded and folded steel barrels (drums) with crimps on casing Specifications《在筒体上有皱纹的焊制的有卷边的钢筒 技术条件》.pdf