TS 3006-1978 CONTINUOUS MECHANICAL HANDLING EQUIPMENT FOR LOOSE BULK MATERIALS - STORAGE EQUIPMENT FED BY A PNFUMATIC HANDLING SYSTEM - SAFETY CODE《松散物料连续机械搬运设备 气动输送系统输送贮存设备 安全规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 993-19-2004 Methods of test for dense shaped refractory products - Part 19 Determination of thermal expansion by a differential method German version EN 993-19 2004《致密成型耐火制品.pdf

DIN EN 993-2 A1-2004 Methods of test for dense shaped refractory products - Part 2 Determination of true density German version EN 993-2 1995 A1 2003《密实成型耐火制品的试验方法 第2部分 真密度测定》.pdf

DIN EN 993-2-1995 Methods of test for dense shaped refractory products - Part 2 Determination of true density German version EN 993-2 1995《致封成型耐火制品试验方法 第2部分 精确密度的测定 德文版本 EN 993-2 1.pdf

DIN EN 993-3-1997 Methods of test for dense shaped refractory products - Part 3 Test methods for carbon-containing refractories German version EN 993-3 1997《压实成形耐火制品试验方法 第3部分 含碳制品试.pdf

DIN EN 993-4-1995 Methods of test for dense shaped refractory products - Part 4 Determination of permeability to gases German version EN 993-4 1995《致密成型耐火制品试验方法 第4部分 透气性测定 德文版本 EN .pdf

DIN EN 993-5-1998 Methods of test for dense shaped refractory products - Part 5 Determination of cold crushing strength German version EN 993-5 1998《密实成型耐火制品的试验方法 第5部分 冷脆强度的测定》.pdf

DIN EN 993-6-1995 Methods of test for dense shaped refractory products - Part 6 Determination of moduls of rupture at ambient temperature German version EN 993-6 1995《致密成型耐火制品的试验方法.pdf

DIN EN 993-7-1998 Methods of test for dense shaped refractory products - Part 7 Determination of modulus of rupture at elevated temperatures German version EN 993-7 1998《密时成型耐火制品的试.pdf

DIN EN 993-9-1997 Methods of testing dense shaped refractory products - Part 9 Determination of creep in compression German version EN 993-9 1997《压实成形耐火制品试验方法 第9部分 压缩蠕变测定》.pdf