TS 3173-1978 General Boundary Point-s Monument and Counstruction Rules《一般边界点标石和建造规则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6687-2007 Standard Guide for Testing Printing Ink Vehicles and Components Thereof《印刷油墨载色剂及其成分的测试用标准指南》.pdf

ASTM D6687-2007(2013) 7500 Standard Guide for Testing Printing Ink Vehicles and Components Thereof《印刷油墨载体和成分测试的标准指南》.pdf

ASTM D6688-2001(2006) Standard Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method《夹层法测定印刷品耐液态化学品腐蚀性的标准试验方法》.pdf

ASTM D6688-2011 9375 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique《夹层法测定印刷品耐液态化学品腐蚀性的标准操作规程》.pdf

ASTM D6689-2001(2006) Standard Guide for Optimizing Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization《同样试验组织内多层工作台最.pdf

ASTM D6689-2001(2011) 5000 Standard Guide for Optimizing Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization《来自同一实验室机.pdf

ASTM D6690-2006a Standard Specification for Joint and Crack Sealants Hot Applied for Concrete and Asphalt Pavements《沥青铺路和混凝土热应用连接和裂纹密封剂的标准规范》.pdf

ASTM D6690-2007 781 Standard Specification for Joint and Crack Sealants Hot Applied for Concrete and Asphalt Pavements《热处理混凝土和沥青铺路中结合处和裂纹用密封剂的标准规范》.pdf

ASTM D6690-2012 red 1875 Standard Specification for Joint and Crack Sealants Hot Applied for Concrete and Asphalt Pavements《混凝土和沥青铺路热应用连接和裂纹密封剂的标准规范》.pdf