TS 343-1977 WOOD PRESERVATION (TERMS AND DEFINIHON)《木材防腐（条件和定义）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 2213 8-1987 SWEET PRODUCTS Acidity and alcalinity determination《钢材产品 酸度和碱度测定》.pdf

STAS 2213 9-1968 《糖水产品 PH值的测定》.pdf

STAS 2214-1986 SLOTTING BACKED OFF CUTTERS WITH PLAIN BORE AND KEY DRIVE Dimensions《带有普通孔和键控的打孔铲齿刀》.pdf

STAS 2215 1-1986 STAGGERED TEETH SIDE AND FACE MILLINC CUTTERS Dimensions《错齿 面对面铣刀 尺寸》.pdf

STAS 2215 2-1980 STRAIGHT TEETH SIDE AND FACE MILLING CUTTERS D imens ions《直齿边和面铣 切割工具尺寸》.pdf

STAS 2216-1967 《轻合金的螺旋形圆柱铣刀大小》.pdf

STAS 222-1966 《嫁接葡萄》.pdf

STAS 2220-1988 TAPERED SCREWED GAUGES AND PLANE GAUGES FOR PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREAD Dimensions《测量耐压接缝管道螺纹的锥度规和平面规尺寸》.pdf

STAS 2221 1-1976 ANHYDROUS SODIUM SULPHITE TECHNICA.L GRADE《无水亚硫酸钠，技术等级》.pdf