TS 3459-1980 WOOD DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN《木材 平行于木纹极限剪切应力的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K T3 122-1983 GO and NO TGO plug gauges for holes from f to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的过端和不过端塞规》.pdf

JUS K T3 123-1983 G0 plug gauges for hofos from 1 to anti inckiding 50 mm nominal aintnater《适用于标称直径为1-50毫米（含）的孔洞的过端塞规》.pdf

JUS K T3 124-1983 NO TGO plug gauges for holes from 1 to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的不过端塞规》.pdf

JUS K T3 130-1983 GO gauging members for holes over 40 up to and inckiding 120 mm nominal diameter《GO 钻孔螺旋塞计量器大于40 到120 毫米包括120毫米 公称口径》.pdf

JUS K T3 131-1983 NOTGO gauging memberes for holes over 40 to 120 mm nominal diameter cylindrical plug gauges《适用于标称直径在40-120毫米之间的孔径的不过端测量的圆柱塞规》.pdf

JUS K T3 136-1983 Cylindrical GO plug gauges for holes above 40 to and including 120 mm nominal diameter《圆柱 GO 钻孔螺旋塞计量器大于 40 到120 毫米包括120毫米 公称口径》.pdf

JUS K T3 137-1983 Cylindrical NOTGO pluggauges for holes above 40 to and including 120mm nominal diameter《圆柱NOTGO 钻孔螺旋塞计量器大于40 到120 毫米包括120毫米 公称口径》.pdf

JUS K T3 140-1983 GO and NO TGO plug gauges for holes above 40 to and including 65 mm nominal diameter《GO 及 NO TGO 螺旋塞孔计量器大于40到 65 毫米 包括65毫米公称口径》.pdf

JUS K T3 145-1983 Segmenta! cylindrical plate 50 gauges for holes above 120 to and including 200 mm nominal diameter《部分圆柱板 50 钻孔计量器大于 120 到200 毫米 包括200毫米 公称口径》.pdf