TS 383-1979 BUTCHERY CATTLE《肉用牛》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16192-1970 Blanks of female dies inserts of horizontal forging machines Construction and dimensions《卧式锻造机冲模镶块坯料 结构及尺寸》.pdf

GOST 16193-1970 Blanks of dies backing of horizontal forging machines Construction and dimensions《平锻机模具衬板半成品 结构和尺寸》.pdf

GOST 16194-1970 Prismatic keys of dies of horizontal forging machines Construction and dimensions《卧式锻造机冲模用棱形键 结构及尺寸》.pdf

GOST 16195-1970 Blanks of male dies holders for wedged and flanged fixing of male dies of horizontal forging machines Construction and dimensions《用楔和法兰固定卧式锻造机压模冲头用冲头板坯料 结构及尺寸》.pdf

GOST 16196-1970 Blanks of male dies holders for screwed fixing of male dies of horizontal forging machines Construction and dimensions《平锻机阳模螺丝固定用阳模固定板半成品 结构和尺寸规格》.pdf

GOST 16197-1970 Blanks of male dies holders for coupling fixing of male dies of horizontal forging machines Construction and dimensions《拉固卧式锻造机压模冲头用冲头板坏料 结构及尺寸》.pdf

GOST 16198-1970 Blanks of details and details of dies of horizontal forging General technikal requirements《平锻机零件和模具零件半成品 一般技术要求》.pdf

GOST 162-1990 Depth gauges Specifications《游标深度卡尺 技术条件》.pdf

GOST 16202-1981 Basic requirements for interchangeability Gearings conical with circular gears Basic rack《可交换性的一般要求 带圆柱齿轮的伞齿轮 基准齿条》.pdf