TS 492-1979 CHISELS FOR METALVVORK NG《金属加工凿》.pdf

相关资源

SH T 0665-1998 润滑剂和有关产品（L类）—M组（金属加工）—制定标准的导则.pdf

GB T 32812-2016 金属加工液 有害物质的限量要求和测定方法.pdf

DB11 T 133-2001 金属加工设备修理通用技术条件.pdf

GB T 7631.5-1989 润滑剂和有关产品(L类)的分类 第5部分 M组(金属加工).pdf

SH T 0665-1998 润滑剂和有关产品(L类)―M组(金属加工)―制定标准的导则.pdf

GB T 32812-2016 金属加工液 有害物质的限量要求和测定方法.pdf

ASTM D4627-2012(2017) Standard Test Method for Iron Chip Corrosion for Water&x2013 Miscible Metalworking Fluids《水溶性金属加工液的铁片腐蚀用标准试验方法》.pdf

STAS 10114-1991 Non-emulsifyable oils for metals working P1H P1A and P1B Oils《用于金属加工的非乳化油 P1H，P1A和P1B油 》.pdf

ANSI ASTM E2523-2013 Standard Terminology for Metalworking Fluids and Operations《金属加工液和操作的术语》.pdf

STAS 5943-1981 METALS WORKING BY DEFORMA- TION AND SEGREGATION Glossary of terms《变形和偏析金属加工 术语表》.pdf

猜你喜欢

ASTM E2630-2008(2013) Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source《采用窄带源测定荧光标本的亮度比的标准试验方法》.pdf

ASTM E2630-2008e1 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source《使用窄带源测定荧光标本的亮度比的标准试验方法》.pdf

ASTM E2631-2009 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label《实体控制补充识别标签的实际位置的标准规程》.pdf

ASTM E2631-2009(2015) Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label《实体控制补充识别标签的实际位置的标准实践规程》.pdf

ASTM E2632 E2632M-2013 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials《评估甲板材料在甲板消防条件下试验响应的标准试验方法》.pdf

ASTM E2632 E2632M-2013e1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials《评估甲板材料在甲板消防条件下试验响应的标准试验方法》.pdf

ASTM E2634-2008 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems《平面墙体混凝土保温(ICF)系统标准规范》.pdf

ASTM E2634-2010 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems《平壁绝热混凝土浇铸模板系统标准规范》.pdf

ASTM E2634-2011 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems《光面墙隔热混凝土模板(ICF)系统的标准规范》.pdf