TS 56-1981 WOOD POLES FOR OVERHEAD LINES (POWER AND TELECOMMUNICATION LINES)《架空线用电杆（供电和电信线）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 20105-A02-1994 Textiles - Tests for colour fastness - Part A02 Grey scale for assessing change in colour (ISO 105-A02 1993) German version EN 20105-A02 1994《纺织品 色牢度试验 第A02部分.pdf

DIN EN 20105-A03-1994 Textiles - Tests for colour fastness - Part A03 Grey scale for assessing staining (ISO 105-A03 1993) German version EN 20105-A03 1994《纺织品 色牢度试验 第A03部分 着色剂评定用灰.pdf

DIN EN 20105-N01-1995 Textiles - Tests for colour fastness - Part N01 Colour fastness to bleaching Hypochlorite (ISO 105-N01 1993) German version EN 20105-N01 1995《纺织品 色牢度试验 第1部分 耐.pdf

DIN EN 20187-1993 Paper board and pulps standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187 1990) Germ.pdf

DIN EN 20273-1992 Fasteners clearance holes for bolts and screws (ISO 273 1979) german version EN 20273 1991《紧固件 螺栓和螺钉的间隙孔(ISO 273-1979)》.pdf

DIN EN 20594-1 Berichtigung 1-1996 Corrigenda to DIN EN 20594-1 1995-01 (EN 20594-1 1993 AC 1996)《DIN EN 20594-1 1995-01技术勘误》.pdf

DIN EN 20594-1-1995 Conical fittings with a 6 % (Luer) taper for syringes needles and certain other medical equipment - Part 1 General requirements (ISO 594-1 1986) German version .pdf

DIN EN 20865-1992 Slots in platens for projection welding machines (ISO 865 1981) german version EN 20865 1991《凸焊机工作台上的T型槽(ISO 865-1981)》.pdf

DIN EN 20898-7-1995 Mechanical properties of fasteners - Part 7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7 1992) German.pdf