TS 613-1968 Classification of Brasses Leaded Brasses Special Brasses and High Tensile Brasses《黄铜、含铅黄铜、特殊黄铜和高强度黄铜分类》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF B40-109-1983 Refractory bricks for use in rotary kilns - Hot face identification marking《回转窑用耐火砖 热面标记》.pdf

NF B40-201-1987 Refractory products Raw materials and unshaped refractories Sampling 《耐火制品 原料和散装耐火材料 取样》.pdf

NF B40-300-11-2008 Methods of test for dense shaped refractory products - Part 11 determination of resistance to thermal shock 《致密成型耐火制品检验方法 第11部分 耐热冲击性测定》.pdf

NF B40-300-1995 Methods of test for dense shaped refractory products Part 6 determination of modulus of rupture at ambient temperature 《致密异型耐火材料制品的试验方法 第 6部分：在环境温度下断裂模量的测定》.pdf

NF B40-301-1995 Methods of test for dense shaped refractory products Part 2 determination of true density 《致密异型耐火材料制品的试验方法 第2部分：真密度的测定》.pdf

NF B40-302-1998 Methods of test for dense shaped refractory products Part 7 determination of modulus of rupture at elevated temperatures 《致密异型耐火产品的试验方法 第7部分 高温时破裂模数的测定》.pdf

NF B40-305-1995 Methods of test for dense shaped refractory products Part 13 specification for pyrometric reference cones for laboratory use 《致密异型耐火材料制品的试验方法 第13部分 实验室用标准测温锥规范》.pdf

NF B40-308-1986 Refractories - Determination of thermal expansion at elevated temperatures《耐火材料 高温热膨胀的测定》.pdf

NF B40-309-1986 Refractories - Determination of the density the open porosity and the total porosity of materials in grain form《耐火材料 晶粒形状材料的密度 开气孔和总孔隙度的测定》.pdf