TS 747-1969 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF LOSS OF MASS AT 300 C (CONVENTIONAL MOISTURE)《主要用于铝生产的氧化铝　300℃温度下质量损失的测定（传统含水量）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 25178-2-2012 en Geometrical product specifications (GPS) - Surface texture Areal - Part 2 Terms definitions and surface texture parameters《产品几何技术规范(GPS) 表面纹理 面积 表面纹理参数和定义》.pdf

EN ISO 25178-3-2012 en Geometrical product specifications (GPS) - Surface texture Areal - Part 3 Specification operators《产品几何技术规范(GPS) 表面纹理 表面 第3部分 操作者规范》.pdf

EN ISO 25178-6-2010 en Geometrical product specifications (GPS) - Surface texture Areal - Part 6 Classification of methods for measuring surface texture《产品几何技术规范(GPS) 表面纹理 表面 第6部分 .pdf

EN ISO 25178-601-2010 en Geometrical product specifications (GPS) - Surface texture Areal - Part 601 Nominal characteristics of contact (stylus) instruments《产品几何技术规范(GPS) 表面纹理 平面 接.pdf

EN ISO 25178-602-2010 en Geometrical product specifications (GPS) - Surface texture Areal - Part 602 Nominal characteristics of non-contact (confocal chromatic probe) instruments《产.pdf

EN ISO 25178-603-2009 en Geometrical product specifications (GPS) - Surface texture Areal - Part 603 Nominal characteristics of non-contact (phase-shifting interferometric microsco.pdf

EN ISO 25178-603-2013 9463 Geometrical product specifications (GPS) - Surface texture Areal - Part 603 Nominal characteristics of non-contact (phaseshifting interferometric microsc.pdf

EN ISO 25178-604-2013 en Geometrical product specifications (GPS) - Surface texture Areal - Part 604 Nominal characteristics of non-contact (coherence scanning interferometry) inst.pdf

EN ISO 25178-605-2014 en Geometrical product specifications (GPS) - Surface texture Areal - Part 605 Nominal characteristics of non-contact (point autofocus probe) instruments《产品几何.pdf