TS 809-1970 SULPHATED SLAG CEMENT《矿渣硫酸盐水泥》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 252-2007 Conveyor belts - Adhesion between constitutive elements - Test methods《输送带 结构元件间的粘附 试验方法》.pdf

BS EN ISO 2535-2002 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature《塑料 不饱和聚酯树脂 室温条件下胶凝时间的测量》.pdf

BS EN ISO 2538-1-2014 Geometrical product specifications (GPS) Wedges Series of angles and slopes《几何产品技术规格 (GPS) 棱体 角度和斜度系列》.pdf

BS EN ISO 2538-2-2014 Geometrical product specifications (GPS) Wedges Dimensioning and tolerancing《几何产品技术规格 (GPS) 棱体 尺寸和公差》.pdf

BS EN ISO 2553-2013 Welding and allied processes Symbolic representation on drawings Welded joints《焊接及相关工艺 图纸上的符号表示 焊接接头》.pdf

BS EN ISO 2560-2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification《焊接材料 非合金钢和细粒钢的手工金属电弧焊用涂敷焊条 分类》.pdf

BS EN ISO 2566-1-1999 Steel - Conversion of elongation values - Carbon and low alloy steels《钢 伸长值的换算 碳素钢和低合金钢》.pdf

BS EN ISO 2566-2-2001 Steel - Conversion of elongation values - Austenitic steels《钢 伸长值换算 奥氏体钢》.pdf

BS EN ISO 2578-1993 Plastics - Determination of the time-temperature limits after prolonged exposure to heat《塑料 长期暴露于热作用后时间和温度极限值的测定》.pdf