TSG Q7007-2007 Type Test Rule for Portal Crane《门座起重机型式试验细则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 2928-2008 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar(2 5 MPa)-Specification《25巴(2 5MPa).pdf

KS M ISO 2929-2008 Rubber hoses and hose assemblies for bulk fuel delivery by truck－Specification《油槽车排吸油用橡胶软管和软管组件 规范》.pdf

KS M ISO 2930-2012 Rubber raw natural－Determination of plasticity retention index(PRI)《天然生橡胶 可塑性保留指数(PRI)的测定》.pdf

KS M ISO 295-2010 Plastics－Compression moulding of test specimens of thermosetting materials《塑料 热固性材料试样的压模塑法》.pdf

KS M ISO 3007-2012 Petroleum products and crude petroleum－Determination of vapour pressure－Reid method《石油产品和原油 蒸气压力的测定 瑞德(Reid)法》.pdf

KS M ISO 3011-2012 Rubber- or plastics-coated fabrics－Determination of resistance to ozone cracking under static conditions《橡胶或塑料涂覆织物 静态条件下抗臭氧龟裂的测定》.pdf

KS M ISO 3014-2012 Petroleum products－Determination of the smoke point of kerosine《石油制品 煤油发烟点测定》.pdf

KS M ISO 3015-2008 Petroleum products－Determination of cloud point《石油产品 烟点测定》.pdf

KS M ISO 308-2010 Plastics－Phenolic moulding materials－Determination of acetone-soluble matter(apparent resin content of material in the unmoulded state)《塑料 酚醛模塑材料 丙酮可溶性物质(在未模塑状态时表.pdf