UL 1066 CRD-2016 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures - Section Paragraph Reference 1 7 Subject Increase voltage limit to 1000Vac.pdf

上传人:ideacase155 文档编号:1067301 上传时间:2019-04-02 格式:PDF 页数:2 大小:26.54KB
下载 相关 举报
UL 1066 CRD-2016 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures - Section  Paragraph Reference 1 7 Subject Increase voltage limit to 1000Vac.pdf_第1页
第1页 / 共2页
UL 1066 CRD-2016 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures - Section  Paragraph Reference 1 7 Subject Increase voltage limit to 1000Vac.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared by UL LLC. It is normative for the applicable ULProduct Certification Program(

2、s); however, it is currently not part of the UL Standard(s) referencedbelow.Product Category (CCN): PAQT, PASQ, PAQX, PAXW, PASD, PAQR, PAYKStandard Number: UL 1066Standard Title: Standard for Low-Voltage AC and DC Power Circuit Breakers Used inEnclosuresEdition Date: April 13, 2012Edition Number: 4

3、Section / Paragraph Reference: 1.7Subject: Increase voltage limit to 1000Vac and 1500VdcDECISION:1.7 These requirements cover equipment rated 6001000 V or less nominal, 635 1058 V maximum ac and300 1500 V maximum dc.RATIONALE FOR DECISION:With the change to the NEC, IEEE C37.13 the Standard for Low-

4、Voltage AC Power Circuit Breakers Usedin Enclosures, and C37.14 the Standard Low-Voltage DC (3200 V and below) Power Circuit BreakersUsed in Enclosures to allow up to 1000V for low voltage applications, requirements need to be revised forall low-voltage equipment to allow for the increased limit. Th

5、is proposal increases the limit from 600V to1000Vac and 1500Vdc.Copyright 2016 UL LLCUL LLC, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby an

6、yone. Certification Requirement Decisions are the opinion of UL LLC. in practically applying therequirements of the standard. They do not represent formal interpretations of the standard underAmerican National Standards Institute (ANSI) processes. UL LLC shall not be responsible to anyone forthe use

7、 of or reliance upon Certification Requirement Decisions by anyone. UL LLC shall not incur anyobligation or liability for damages, including consequential damages, arising out of or in connection withthe use or reliance upon Certification Requirement Decisions. The electronic version of the Certific

8、ationRequirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 1066 -2-No Text on This Page

展开阅读全文
相关资源
猜你喜欢
  • SAE AMS 5652H-2010 Steel Corrosion and Heat Resistant Bars Wire Forgings Tubing and Rings 25Cr - 20Ni - 2 0Si (SAE 30314) Solution Heat Treated《25Cr 20Ni 2Si(SAE 30314)固溶热处理耐腐蚀及耐热钢.pdf SAE AMS 5652H-2010 Steel Corrosion and Heat Resistant Bars Wire Forgings Tubing and Rings 25Cr - 20Ni - 2 0Si (SAE 30314) Solution Heat Treated《25Cr 20Ni 2Si(SAE 30314)固溶热处理耐腐蚀及耐热钢.pdf
  • SAE AMS 5652J-2016 Steel Corrosion and Heat Resistant Bars Wire Forgings Tubing and Rings 25Cr - 20Ni - 2 0Si (SAE 30314) Solution Heat Treated (UNS S31400).pdf SAE AMS 5652J-2016 Steel Corrosion and Heat Resistant Bars Wire Forgings Tubing and Rings 25Cr - 20Ni - 2 0Si (SAE 30314) Solution Heat Treated (UNS S31400).pdf
  • SAE AMS 5653H-2012 Steel Corrosion and Heat-Resistant Bars Wire Forgings Tubing and Rings 17Cr - 12Ni - 2 5Mo (0 030 Max C) (316L) Solution Heat Treated (UNS S31603)《溶解热处理17Cr 12Ni.pdf SAE AMS 5653H-2012 Steel Corrosion and Heat-Resistant Bars Wire Forgings Tubing and Rings 17Cr - 12Ni - 2 5Mo (0 030 Max C) (316L) Solution Heat Treated (UNS S31603)《溶解热处理17Cr 12Ni.pdf
  • SAE AMS 5654F-2011 Steel Corrosion and Heat Resistant Bars Wire Forgings Tubing and Rings 18Cr - 11Ni - 0 60Cb (Nb) (347) Premium Aircraft Quality Consumable Electrode Melted Solut.pdf SAE AMS 5654F-2011 Steel Corrosion and Heat Resistant Bars Wire Forgings Tubing and Rings 18Cr - 11Ni - 0 60Cb (Nb) (347) Premium Aircraft Quality Consumable Electrode Melted Solut.pdf
  • SAE AMS 5655E-2001 Steel Corrosion and Heat Resistant Bars Wire and Forgings 12 5Cr - 0 75Ni - 1 0Mo - 1 0W - 0 24V (0 20-0 25C) Hardened and Tempered (UNS S42200)《调质的含12 5Cr-0 75N.pdf SAE AMS 5655E-2001 Steel Corrosion and Heat Resistant Bars Wire and Forgings 12 5Cr - 0 75Ni - 1 0Mo - 1 0W - 0 24V (0 20-0 25C) Hardened and Tempered (UNS S42200)《调质的含12 5Cr-0 75N.pdf
  • SAE AMS 5655F-2016 Steel Corrosion and Heat Resistant Bars Wire and Forgings 12 5Cr - 0 75Ni - 1 0Mo - 1 0W - 0 24V (0 20-0 25C) Hardened and Tempered (UNS S42200).pdf SAE AMS 5655F-2016 Steel Corrosion and Heat Resistant Bars Wire and Forgings 12 5Cr - 0 75Ni - 1 0Mo - 1 0W - 0 24V (0 20-0 25C) Hardened and Tempered (UNS S42200).pdf
  • SAE AMS 5656F-2015 Steel Corrosion Resistant Bars Wire Forgings Extrusions and Rings 9 0Mn - 20Cr - 6 5Ni - 0 27N Solution Heat Treated (UNS S21904).pdf SAE AMS 5656F-2015 Steel Corrosion Resistant Bars Wire Forgings Extrusions and Rings 9 0Mn - 20Cr - 6 5Ni - 0 27N Solution Heat Treated (UNS S21904).pdf
  • SAE AMS 5659 H1025A-2013 Steel Corrosion-Resistant Bars Wire Forgings Rings and Extrusions 15Cr - 4 5Ni - 0 30Cb (Nb) - 3 5Cu Consumable Remelted Solution and Precipitation Heat Tr.pdf SAE AMS 5659 H1025A-2013 Steel Corrosion-Resistant Bars Wire Forgings Rings and Extrusions 15Cr - 4 5Ni - 0 30Cb (Nb) - 3 5Cu Consumable Remelted Solution and Precipitation Heat Tr.pdf
  • SAE AMS 5659S-2016 Steel Corrosion-Resistant Bars Wire Forgings Rings and Extrusions 15Cr - 4 5Ni - 0 30Cb (Nb) - 3 5Cu (UNS S15500).pdf SAE AMS 5659S-2016 Steel Corrosion-Resistant Bars Wire Forgings Rings and Extrusions 15Cr - 4 5Ni - 0 30Cb (Nb) - 3 5Cu (UNS S15500).pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1