1、 STD-UL 1102-ENGL 1779 m 7275795 0773b4q 2b2 m Underwriters laboratories Inc. GO Northbrook, Illinois (847) 272-8800 Melville, NewYork*(516) 271-6200 Santa Clara, California (408) 985-2400 Research Triangle Park, North Carolina (919) 549-1400 Camas, Washington*(360) 817-5500 Underwriters Laboratorie
2、s Inc., founded in 1894, is chartered as a not-for-profit organization without capital stock, under the laws of the State of Delaware, to establish, maintain, and operate laboratories for the examination and testing of devices, systems and materials to determine their relation to hazards to life and
3、 property, and to ascertain, define and publish standards, classifications and specifications for materials, devices, products, equipment, constructions, methods, and systems affecting such hazards. UL Standards for Safety are developed under a procedure which provides for participation and comment
4、from the affected public as well as industry. The procedure takes into consideration a survey of known existing standards and the needs and opinions of a wide variety of interests concerned with the subject matter of the standard. Thus manufacturers, consumers, individuals associated with consumer-o
5、riented organizations, academicians, government officials, industrial and commercial users, inspection authorities, insurance interests and others provide input to UL in the formulating of UL Standards for Safety, to keep them consonant with social and technological advances. A not-for-profit organi
6、zation dedicated to public safety and committed to quality service FEBRUARY 4,1999 - UL 11 02 trl Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Nonintegral Marine Fuel Tanks, UL 1102 Fifth Edition, Dated February 4, 1999 The master for th
7、is Standard at Urs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accuracy of this Standard. ULs Standards for Safety are copyright
8、ed by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the
9、 sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. Revisions of UL Standards for Sa
10、fety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard “as is“ without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or
11、fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL
12、representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt to answer support requests concerning WordPerect, Envoy, and Standards-on-Diskette. How
13、ever, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports a Standards-on-Diskette only if it is used under the conditions and operating systems for which it is intended. ULs support policies may change from time-to-
14、time without notification. UL reserves the right to change the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice. Standards-on-Diskette purchasers agree to defend, indemnify, and hold UL harmless
15、 from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing a Standard-on-Diskette on the purchasers computer system. If a single-user version Standards-on-Diskette was p
16、urchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possib
17、ility of multiple concurrent access. The original distribution diskette should be stored in a safe place. STD-UL LL02-ENGL 1777 m 7275775 0773bllb 035 m te FEBRUARY 4.1999 - UL 1102 If a multiple-user version Standards-on-Diskette was purchased, one copy of the Standard may be stored on a single LAN
18、 file-server, or on the permanent storage device of a multiple-user computer. The number of concurrent users shall not exceed the number of users authorized for the Standards-on-Diskette version. The original distribution diskette should be stored in a safe place. Standards-on-Diskette are intended
19、for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of a Standards-on-Diskette. Only one copy of the Standard may be printed for each authorized user of a multiple-user
20、 version of a Standards-on-Diskette. An employee of an organization purchasing a Standard-on-Diskette can make a copy of the page or pages being viewed for their own fair and/or practical internal use. Because of differences in the computer/software/printer setup used by UL and those of Standards-on
21、-Diskette purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures, and/or other elements of the Standard having future e
22、ffective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a ”SUPERSEDED REQUIREMENTS” notice. Copyright O 1999 Underwriters Laboratories Inc. Th
23、is Standard consists of pages dated as shown in the following checklist: Page Date 1-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . February 4, 1999 FEBRUARY 4,1999 1 UL 1102 Standard for Nonintegr
24、al Marine Fuel Tanks First Edition - July, 1972 Second Edition - August, 1978 Third Edition - June, 1980 Fourth Edition -January, 1992 Fifth Edition February 4,1999 An effective date in luded as a note immediately following certain requirements is one established by Underwriters Laboratories Inc. Re
25、visions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements.
26、 0-7629-0266-3 COPYRIGHT Q 1979,1999 UNDERWRITERS LABORATORIES INC. STD-UL 1102-ENGL 1777 D 7275775 0773b48 708 2 NONINTEGRAL MARINE FUEL TANKS - UL 1102 FEBRUARY 4,1999 No Text on This Page FEBRUARY 4. 1999 NONINTEGRAL MARINE FUEL TANKS . UL 1102 3 CONTENTS FOREWORD 6 INTRODUCTION 1 Scope . 7 2 Gen
27、eral 7 2.1 Components . 7 2.2 Units of Measurement . 8 CONSTRUCTION 3 General 8 4 Materials . 8 6 Baffles . 9 7 Fittings . 10 8 Piping 10 5 Gaskets 9 9 Bonding Terminal 11 PERFORMANCE 10 General 12 11 Static Pressure Test 12 12 Fire Test . 12 12.1 General . 12 12.2 Test method - All tests . 14 12.3
28、General installation test . 15 12.4 Specific installation . 18 13 Preconditioning Test 19 14 ShockTest . 19 19 16 Slosh Test . 21 15 Pressure Impulse Test 17 Pressure Leakage Test 22 18 Fittings ShockTest . 22 19.2 Oven aging 23 19 Marking Plate Adhesion Tests 22 19.1 General . 22 19.3 Cold exposure
29、 . 23 19.4 Immersion - water 23 19.5 Salt spray . 23 19.6 Immersion - oil 23 19.7 Accelerated weathering . 23 19.8 As-received 24 20 Gasket Tests . 24 MANUFACTURING AND PRODUCTION TESTS 21 General 24 4 STD*UL 1102-ENGL 1777 7275775 0773b50 5bb H NONINTEGRAL MARINE FUEL TANKS - UL 1102 FEBRUARY 4.199
30、9 MARKING 22 General . . . . . .25 STD*UL 1102-ENGL 1777 9275795 0773b51 4T2 FEBRUARY 4,1999 NONINTEGRAL MARINE FUEL TANKS - UL 1102 5 No Text on This Page STD-UL 1102-ENGL 1777 9275775 0773b52 339 = 6 NONINTEGRAL MARINE FUEL TANKS - UL 1102 FEBRUARY 4,1999 FOREWORD A. This Standard contains basic r
31、equirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records of tests and field exp
32、erience, and an appreciation of the problems of manufacture, installation, and use derived from consultation with and information obtained from manufacturers, users, inspection authorities, and others having specialized experience. They are subject to revision as further experience and investigation
33、 may show is necessary or desirable. B. The observance of the requirements of this Standard by a manufacturer is one of the conditions of the continued coverage of the manufacturers product. C. A product which complies with the text of this Standard will not necessarily be judged to comply with the
34、Standard if, when examined and tested, it is found to have other features which impair the level of safety contemplated by these requirements. D. A product employing materials or having forms of construction which conflict with specific requirements of the Standard cannot be judged to comply with th
35、e Standard. A product employing materials or having forms of construction not addressed by this Standard may be examined and tested according to the intent of the requirements and, if found to meet the intent of this Standard, may be judged to comply with the Standard. E. UL, in performing its funct
36、ions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of UL represent its professional judgment given with due consideration to the necessary limitations of practical operation and state
37、of the art at the time the Standard is processed. UL shall not be responsible to anyone for the use of or reliance upon this Standard by anyone. UL shall not incur any obligation or liability for damages, including consequential damages, arising out of or in connection with the use, interpretation o
38、f, or reliance upon this Standard. F. Many tests required by the Standards of UL are inherently hazardous and adequate safeguards for personnel and property shall be employed in conducting such tests. STD-UL LL02-ENGL 1777 = 7275775 0773b53 275 D FEBRUARY 4,1999 NONINTEGRAL MARINE FUEL TANKS - UL 11
39、02 7 INTRODUCTION 1 Scope 1.1 These requirements cover nonintegral, vented gasoline fuel tanks designed and constructed in accordance with theunited States Coast Guard Safety Standard for Gasoline Fuel Systems, Code of Federal Regulations, Title 33, Chapter 1, Part 183, Subpart J-1990 and nonintegra
40、l diesel fuel tanks. 1.2 The fuel tanks covered by these requirements are intended for fixed installation with deck fill provision and for permanent installation in accordance with the applicable installation requirements of U.S. Coast Guard; the applicable requirements of the Fire Protection Standa
41、rd for Pleasure and Commercial Motor Craft (National Fire Codes, vol. 6), NFPA 302-1994; and/or the requirements of the American Boat 81 Yacht Council, Inc. 1.3 These requirements do not cover portable marine fuel tanks or tanks integral with any boat structure. 1.4 A product that contains features,
42、 characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determine
43、d necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standa
44、rd. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. 2 General 2.1 Components 2.1.1 Except as indicated in 2.1.2, a component of a product covered by this stan
45、dard shall comply with the requirements for that component. 2.1.2 A component need not comply with a specific requirement that: a) Involves a feature or characteristic not needed in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this
46、 standard. 2.1.3 A component shall be used in accordance with its recognized rating established for the intended conditions of use. 2.1.4 Specific components are recognized as being incomplete in construction features or restricted in performance capabilities. Such components are intended for use on
47、ly under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions for which they have been recognized. 6 NONINTEGRAL MARINE FUEL TANKS - UL 1102 FEBRUARY 4,1999 2.2 Units of Measurement 2.2.1 If a value for measurement is
48、 followed by a value in other units in parentheses, the second value may be only approximate. The first stated value is the requirement. CONSTRUCTION 3 General 3.1 All exterior edges, projections, and corners shall be smooth and rounded. 3.2 All joints and seams shall be equal to or stronger than th
49、e material being joined and shall neither provide nor create crevices in which water may collect. 3.3 The material bend radius of rectangular and specially shaped tanks and of baffle flanges and the like shall be not smaller than the minimum bend radius specified by the material manufacturer for the particular alloy and material thickness. 3.4 There shall be no openings in the bottom, sides or ends of a fuel tank other. than as specified in 7.3. Any opening into the fuel tank, for example fill pipe feed pipe, vent connections, shall be at or
