1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1309 Marine Shipboard CableUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD
2、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Marine Shipboard Cable, UL 1309 Second Edition, Dated April 5, 2011 Summary of Topics This revision of ANSI/UL 1309 is being issued to incorporate the following changes in requirements: Revised Dielectric Constant for Silic
3、one S100 in Table 5.2 Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publica
4、tion or the date on which the changed requirement becomes effective. The revised requirements are substantially in accordance with Proposal(s) on this subject dated April 11, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
5、 form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose
6、. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been a
7、dvised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against a
8、ny loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those pa
9、ragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded b
10、y a SUPERSEDED REQUIREMENTS notice. The following table lists the future effective dates with the corresponding reference. JUNE 11, 2014 UL 1309 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Future Effective Date Reference November 1, 2
11、014 5.1.1, Table 5.1, Table 5.2, Table 14.1, 24.1, 25.2, and 25.4 JUNE 11, 2014 UL 1309 tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 5, 2011 (Title Page Reprinted: June 11, 2014) 1 UL 1309 Standard for Marine Shipboard Cable Firs
12、t Edition July, 1995 Second Edition April 5, 2011 This ANSI/UL Standard for Safety consists of the Second Edition including revisions through June 11, 2014. The most recent designation of ANSI/UL 1309 as an American National Standard (ANSI) occurred on June 9, 2014. ANSI approval for a standard does
13、 not include the Cover Page, Transmittal Pages, Title Page, or effective date information. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development Syste
14、m (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGH
15、T 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 1309-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 18, 2013 MARINE SHIPBOARD CABLE - UL 1309 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR D
16、ISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .5 2 Units of Measurement .5 3 References .5 CONSTRUCTION 4 Copper Conductors .5 4.1 General .5 4.2 Composition .6 4.3 Stranding 6 4.4 Joints .9 4.5 Conductor stress control layer (for cables rated above 2 kV) .9 5 Insulation .10 5
17、.1 General 10 5.2 Separator 10 5.3 Thickness of extruded insulation 11 5.4 Properties of insulation .12 6 Insulation Shield .16 7 Binder or Separator 16 8 Braids 16 9 Conductor Identication .16 10 Shielding 17 11 Individually shielded components and overall shielding 17 12 Cabling 17 13 Fillers .18
18、14 Cable Jackets 18 14.1 General .18 14.2 Integral insulation/jacket .20 14.3 Jacket thickness .21 15 Metal Wire Armor (Optional) .21 15.1 General .21 15.2 Aluminum armor .23 15.3 Commercial bronze armor .23 15.4 Copper armor 23 16 Corrugated Aluminum Sheath (Optional) .23 17 Paint 24 18 Jacket Over
19、 Armor 24 19 Equipment Grounding Conductors 24 20 System Ground .25 PERFORMANCE 21 General 25 22 Low Temperature Bend Test .26 23 Low Temperature Impact Test 26 24 Sunlight/Weather Resistance Test 26 25 Flame Test .27 26 Ease of Stripping Test .27 MARCH 18, 2013 MARINE SHIPBOARD CABLE - UL 1309 3UL
20、COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 27 Salt Water Immersion Test .28 28 Oil Compatibility Test 28 29 Pulling Through Metal Plates Test 29 30 Bending Endurance Test 32 31 Long-Term Insulation Resistance .32 32 Heat Deformation Test 3
21、2 33 Heat Shock Test of Jacket .33 34 Tension Set of Jacket 34 35 Hot Oil Resistance 34 36 Vertical-Tray Fire and Smoke-Release Test for Cables with “ST1” Marking 34 MANUFACTURING AND PRODUCTION LINE TESTS 37 Spark Test (02k VUnshielded Cables) 35 38 Dielectric Withstand Test on Finished Cable (0 2.
22、4 kV Cables) .35 39 Insulation Resistance Test on Finished Cable (0 2.4 kV Cables) 36 MARKINGS 40 Cable Identication 37 41 Cable Type Designation .38 41.1 General .38 41.2 Specic cable types 39 42 Package Markings 40 APPENDIX A RECOMMENDED PRACTICE FOR COLOR CODE FOR CONTROL AND SIGNAL CABLES a APRI
23、L 5, 2011 MARINE SHIPBOARD CABLE - UL 1309 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope Section 1 effective August 1, 2013 1.1 This Standard species the requirements for distribution (power) cables, and control and s
24、ignal cables for installation aboard marine vessels, xed and oating offshore petroleum facilities, and mobile offshore drilling units (MODUs), in accordance with industry installation standards and the regulations of the authorities having jurisdiction. The cables are single or multi-conductor, with
25、 or without metal armor and/or jacket, and are rated 300 V to 35 kV. 1.2 These cables are not intended for use in accordance with the National Electrical Code (NEC), ANSI/NFPA-70. Cables that also meet the requirements for use with the NEC may be additionally marked with the appropriate Type designa
26、tion from the NEC. 2 Units of Measurement Section 2 effective August 1, 2013 2.1 In addition to being stated in the inch/pound units that are customary in the USA, each of the requirements in this standard is also stated in units that make the requirement conveniently usable in countries employing t
27、he metric system (practical SI). Equivalent although not necessarily exactly identical results are to be expected from applying a requirement in USA or metric terms. Equipment calibrated in metric units is to be used when a requirement is applied in metric terms. 3 References Section 3 effective Aug
28、ust 1, 2013 3.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. CONSTRUCTION 4 Copper Conductors Section 4 effective August 1, 2013 4.1 General 4.1.1 All conductors shall be o
29、f soft annealed stranded copper wire. The conductors may be tinned or alloy coated where necessary to ensure compatibility with primary insulation. Conductor sizes and resistances shall comply, within allowable tolerances, with the Reference Standard for Electrical Wires, Cables, and Flexible Cords,
30、 UL 1581. APRIL 5, 2011 MARINE SHIPBOARD CABLE - UL 1309 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 4.2 Composition 4.2.1 Stranded conductors shall comply with the requirements of the Standard Specication for Soft or Annealed Copper Wi
31、re, ASTM B 3; the Standard Specication for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft, B 8; the Standard Specication for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes, B 33; the Standard Specication for Rope-Lay-Stranded Copper Conductors Having Bunch-Str
32、anded Members, for Electrical Conductors, B 172; the Standard Specication for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors, B 173; the Standard Specication for Bunch-Stranded Copper Conductors for Electrical Conductors, B 174; the Standard Specica
33、tion for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes, B 189; the Standard Specication for Compact Round Concentric-Lay-Stranded Copper Conductors, B 496; or the Standard Specication for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation, B
34、787; as applicable. Metric sizes complying with Conductors of Insulated Cables, IEC 60228 are acceptable. 4.3 Stranding 4.3.1 Except as specied in 4.3.2 4.3.5, the conductors shall be stranded Class B concentric conductors, as specied in the Standard Specication for Concentric-Lay-Stranded Copper Co
35、nductors, Hard, Medium-Hard, or Soft, ASTM B 8. See Table 4.1. Table 4.1 Construction and resistance of standard Class B concentric conductors Conductor size Class B stranding Maximum dc resistance (W /km at 20C) Area in circular mils AWG or kcmil Number of wires Diameter of strand wire Conductor di
36、ameter Uncoated Alloy coated or tinned mm (mils) mm (in) 640 22 7 0.240 (9.6) 0.7 (0.0288) 55.4 59.4 1 020 20 7 0.310 (12.1) 0.9 (0.0363) 34.6 36.7 1 620 18 7 0.386 (15.2) 1.2 (0.0456) 21.8 23.2 2 580 16 7 0.488 (19.2) 1.5 (0.0576) 13.7 14.6 4 110 14 7 0.615 (24.2) 1.8 (0.0726) 8.62 8.96 6 530 12 7
37、0.755 (30.5) 2.3 (0.0915) 5.43 5.64 10 380 10 7 0.987 (38.5) 2.9 (0.116) 3.41 3.55 16 510 8 7 1.234 (48.6) 3.7 (0.146) 2.14 2.23 20 820 7 7 1.384 (54.5) 4.2 (0.164) 1.70 1.77 26 240 6 7 1.554 (61.2) 4.8 (0.184) 1.35 1.40 33 090 5 7 1.748 (68.8) 5.2 (0.206) 1.07 1.11 41 740 4 7 1.961 (77.2) 5.9 (0.23
38、2) 0.848 0.882 52 620 3 7 2.202 (86.7) 6.6 (0.260) 0.673 0.700 66 360 2 7 2.474 (97.4) 7.4 (0.292) 0.534 0.555 83 690 1 19 1.687 (66.4) 8.4 (0.332) 0.423 0.440 105 600 1/0 19 1.892 (74.5) 9.5 (0.373) 0.335 0.349 133 100 2/0 19 2.126 (83.7) 10.6 (0.419) 0.266 0.277 167 800 3/0 19 2.386 (94.0) 11.9 (0
39、.470) 0.211 0.219 211 600 4/0 19 2.680 (105.5) 13.4 (0.528) 0.167 0.172 250 000 250 37 2.088 (82.2) 14.6 (0.575) 0.142 0.147 300 000 300 37 2.286 (90.0) 16.0 (0.630) 0.118 0.123 350 000 350 37 2.471 (97.3) 17.3 (0.681) 0.101 0.105 APRIL 5, 2011 MARINE SHIPBOARD CABLE - UL 1309 6 Table 4.1 Continued
40、on Next PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 4.1 Continued Conductor size Class B stranding Maximum dc resistance (W /km at 20C) Area in circular mils AWG or kcmil Number of wires Diameter of strand wire Conductor diamet
41、er Uncoated Alloy coated or tinned mm (mils) mm (in) 400 000 400 37 2.642 (104.0) 18.5 (0.728) 0.0885 0.0911 500 000 500 37 2.951 (116.2) 20.7 (0.813) 0.0708 0.0729 600 000 600 61 2.520 (99.2) 22.7 (0.893) 0.0590 0.0614 750 000 750 61 2.817 (110.9) 25.3 (0.998) 0.0472 0.0486 1 000 000 1000 61 3.251
42、(128.0) 29.2 (1.152) 0.0354 0.0364 1 250 000 1250 91 2.977 (117.2) 32.7 (1.289) 0.0283 0.0292 1 500 000 1500 91 3.261 (128.4) 37.0 (1.459) 0.0236 0.0243 2 000 000 2000 127 3.187 (125.5) 41.5 (1.632) 0.0177 0.0182 4.3.2 Class B stranded conductors, compressed to a reduction in diameter of 3 percent m
43、aximum of concentric stranded conductors, shall also be permitted. 4.3.3 Unilay stranded conductors complying with the Standard Specication for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation, ASTM B 787 shall also be permitted. 4.3.4 Flexible rope lay stranded conduc
44、tors may be substituted for concentric conductors. Bunch-stranded conductors in sizes 6 AWG and smaller may be substituted for concentric stranded conductor. See Table 4.2. Table 4.2 Construction and resistance of exible stranded conductors Nominal stranding Maximum dc resistance Conductor area in c
45、ircular mils AWG or kcmil Number of wires Individual strand dia. (in) mm 2 Max conductor dia. (in) Ohms per 1000 ft at 25C Ohms per 1000 ft at 20C Ohms per km at 20C Bare Coated Bare Coated Bare Coated 1900 18 19 0.0100 0.96 0.049 6.95 7.21 6.82 7.06 22.4 23.2 2601 16 19 0.0117 1.32 0.059 4.27 4.52
46、4.19 4.43 13.7 14.5 4106 14 19 0.0147 2.08 0.074 2.68 2.85 2.63 2.79 8.63 9.15 6503 12 19 0.0185 3.29 0.093 1.69 1.79 1.66 1.75 5.45 5.74 10 319 10 37 0.0167 5.23 0.113 1.09 1.13 1.07 1.11 3.51 3.63 14 948 8 37 0.0201 7.57 0.136 0.669 0.694 0.656 0.679 2.15 2.23 24 645 6 61 0.0201 12.49 0.175 0.421
47、0.436 0.413 0.427 1.36 1.40 41 668 4 133 0.0177 21.11 0.258 0.276 0.286 0.271 0.280 0.889 0.918 or 4 105 0.0201 66 140 2 133 0.0223 33.51 0.324 0.169 0.175 0.166 0.171 0.545 0.561 or 2 150 0.0201 84 438 1 209 0.0201 42.79 0.361 0.135 0.140 0.132 0.137 0.433 0.449 107 467 1/0 266 0.0201 54.45 0.407 0
48、.107 0.111 0.105 0.109 0.344 0.358 138 172 2/0 342 0.0201 70.01 0.461 0.0853 0.0885 0.0837 0.0866 0.275 0.284 168 876 3/0 418 0.0201 85.57 0.510 0.0682 0.0702 0.0669 0.0687 0.219 0.225 214 933 4/0 532 0.0201 108.91 0.575 0.0538 0.0557 0.0528 0.0545 0.173 0.179 260 991 262 646 0.0201 132.25 0.654 0.0
49、444 0.0460 0.0436 0.0450 0.143 0.148 313 916 313 777 0.0201 159.06 0.720 0.0371 0.0384 0.0364 0.0376 0.119 0.123 APRIL 5, 2011 MARINE SHIPBOARD CABLE - UL 1309 7 Table 4.2 Continued on Next PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 4.2 Continued Nominal stranding Maximum dc resistance Conductor area in circular mils AWG or kcmil Number of wires Individual strand dia. (in) mm 2 Max conductor dia. (in) Ohms per 1000 ft at
