1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1480 Speakers for Fire Alarm and Signaling Systems, Including Accessories STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSIO
2、N FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Speakers for Fire Alarm and Signaling Systems, Including Accessories, UL 1480 Sixth Edition, Dated January 28, 2016 Summary of Topics This is the Sixth Editi
3、on of UL 1480, the new binational joint UL/ULC Standard for Speakers for Fire Alarm and Signaling Systems, Including Accessories. The new requirements are substantially in accordance with Proposal(s) on this subject dated November 21, 2014 and May 29, 2015. All rights reserved. No part of this publi
4、cation may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not l
5、imited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability t
6、o use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards f
7、or Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer sys
8、tem. JANUARY 28, 2016 UL 1480 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 28, 2016 UL 1480 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Prep
9、ared by: ULC Standards CAN/ULC-S541 Fourth Edition Underwriters Laboratories Inc UL 1480 Sixth Edition Speakers for Fire Alarm and Signaling Systems, Including Accessories January 28, 2016 ANSI/UL 1480-2016 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WI
10、THOUT PERMISSION FROM UL Commitment for Amendments This Standard is issued jointly by Underwriters Laboratories Inc. (UL) and ULC Standards. Amendments to this Standard will be made only after processing according to the Standards writing procedures by UL and ULC Standards. UL and ULC Standards are
11、separate and independent entities and each is solely responsible for its operations and business activities. The UL trade names and trademarks depicted in this document are the sole property of Underwriters Laboratories Inc. The ULC Standards trade names and trademarks depicted in this document are
12、the sole property of ULC Standards. ISSN 0317-526X Copyright 2016 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, whatsoever without the prior permission of the publisher. In Canada, written comments are to be sent to ULC Standards, 400 171
13、Nepean Street, Ottawa, Ontario KP2 0B4. Proposals should be submitted on a Standards Revision Request Form available from ULC Standards. Copyright 2016 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered
14、 in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Sixth Edition. The most recent designation of ANSI/UL 1480 as an American National Standard (ANS
15、I) occurred on January 28, 2016. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Propo
16、sal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .
17、5 1 Scope .6 2 General 7 2.1 Components .7 2.2 Units of measurement .8 2.3 Control unit interface 8 2.4 Reference publications 8 2.5 Audible signal pattern 11 3 Glossary 11 4 Instructions and Drawings .13 5 Construction .14 5.1 General 14 5.2 Enclosures .14 5.3 Corrosion protection .20 5.4 Field wir
18、ing connections 21 5.5 Internal wiring .25 5.6 Bonding for grounding .26 5.7 Components electrical 27 5.8 Spacings .32 6 Marking .32 7 Performance Tests .34 7.1 General 34 7.2 Input test .36 7.3 Frequency response and output sound pressure level .36 7.4 Harmonic distortion 38 7.5 Directional charact
19、eristic .38 7.6 Temperature rise 39 7.7 Dielectric voltage-withstand .40 7.8 Endurance 41 7.9 Variable ambient temperature .42 7.10 Humidity 44 7.11 Abnormal operation and burnout test .45 7.12 Component stress 47 7.13 Jarring 48 7.14 Vibration 48 7.15 Strain relief 49 7.16 Accelerated corrosion tes
20、ts 50 7.17 Water spray .51 7.18 “Reserved” 53 7.19 Electric shock current test .53 7.20 Tests on polymeric (plastic) materials .55 7.21 Mechanical strength tests for enclosures 58 7.22 Interference from radio frequency and electromagnetic radiations 60 7.23 Marking permanence .62 7.24 Evaluation of
21、conformal coatings on printed wiring boards .63 7.25 Gasket material tests .63 7.26 Locked rotor test .64 8 Requirements for Dwelling Unit Speakers (in Canada Only) .66 8.1 General 66 JANUARY 28, 2016 CAN/ULC-S541 UL 1480 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTI
22、ON WITHOUT PERMISSION FROM UL 8.2 Output sound pressure level 66 8.3 Operation 66 8.4 Endurance 67 8.5 Timer tests .67 8.6 Operating mechanism 67 8.7 Polarity reversal test .68 9 Manufacturing and Production Tests .68 9.1 General 68 9.2 Production-line dielectric voltage-withstand .68 9.3 Production
23、-line grounding-continuity test for ac mains-voltage, cord-connected products .69 10 Requirements for Protective Covers and Accessories for Speakers .69 10.1 General .69 10.2 Installation instructions 70 10.3 Construction requirements .70 10.4 Markings 71 10.5 Performance tests 71 10.6 Output sound
24、pressure level .72 Tables 73 Figures .82 Annex A (Informative) Standards for Components Annex B (Normative) Alarm Signal Temporal Pattern B1 General .97 B2 Temporal Pattern for Fire Alarm Signal 97 B3 Temporal Pattern for Carbon Monoxide Signal .98 Annex C (Informative) Test Sample Sequence Annex D
25、(Normative) French Translations of Required Markings Annex E (Informative) French Translations of Markings JANUARY 28, 2016 CAN/ULC-S541 UL 1480 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common UL and ULC Standard
26、for Speakers for Fire Alarm and Signaling Systems, Including Accessories. It is the Fourth edition of CAN/ULC-S541 and Sixth edition of ANSI/UL 1480. This Joint Standard was prepared by Underwriters Laboratories Inc., ULC Standards, and the NEMA Technical Harmonization Committee on Notication Applia
27、nces. The standard was formally approved by the UL Standards Technical Panel on Signal Appliances and the ULC Technical Committee on Fire Alarm and Life Safety Equipment and Systems. The efforts and support of the NEMA Technical Harmonization Committee, UL Standards Technical Panel, and ULC Technica
28、l Committee are gratefully acknowledged. Only metric SI units of measurement are used in this Standard. If a value for measurement is followed by a value in other units in parentheses, the second value may be approximate. The rst stated value is the requirement. In Canada, there are two official lan
29、guages, English and French. All safety warnings must be in French and English. Attention is drawn to the possibility that some Canadian authorities may require additional markings and/or installation instructions to be in both official languages. This standard has been approved as a National Standar
30、d of Canada by the Standards Council of Canada. This standard has been approved by the American National Standards Institute as an American National Standard. Annexes A, C, and E are identied as informative and are for informational purposes only. Annexes B and D are identied as normative and form a
31、 mandatory part of this Standard. Note: Although the intended primary application of this Standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of Harmonization This Standa
32、rd is published as an equivalent standard for UL and ULC Standards. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical deviations are allowed for codes and governmental regulations and those recognized as being in accordance with NA
33、FTA Article 905, for example, because of fundamental, climatic, geographical, technological or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is to be word for word except for editorial changes. Interpretations The inter
34、pretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has
35、 been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. JANUARY 28, 2016 CAN/ULC-S541 UL 1480 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL S
36、peakers for Fire Alarm and Signaling Systems, Including Accessories 1 Scope 1.1 These requirements apply to speakers, rated at 300 V or less, for re alarm and signaling systems and intended for indoor and/or outdoor installation: a) In Canada, in accordance with CSA C22.1, Canadian Electrical Code,
37、Part I, Safety Standard for Electrical Installations; and with CAN/ULC S524, Standard for Installation of Fire Alarm Systems. Note: Refer to CAN/ULC-S525, Standard for Audible Signaling Devices for Fire Alarm Systems, Including Accessories, for requirements pertaining to audible signaling devices. b
38、) In the United States, in accordance with the National Electrical Code, NFPA 70, and the National Fire Alarm and Signaling Code, NFPA 72. 1.2 These requirements apply to speakers for use in ordinary (non-hazardous or non-corrosive) indoor locations and outdoor locations. 1.3 This Standard also cove
39、rs protective covers and other accessories used with speakers. 1.4 Speakers for use in hazardous or corrosive locations shall comply with the requirements of this Standard and the applicable requirements a) In Canada, CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for Electrical Instal
40、lations, with respect to the location hazard; b) In the United States, the National Electrical Code, NFPA 70. Note: In the United States, general signaling appliances are covered by UL 464A. 1.5 Each product or device referred to as a speaker in this Standard is a speaker assembly suitable for separ
41、ate installation as a component of a re alarm system. 1.6 A supplementary visual signal, incorporated as part of Speaker which is intended for re alarm application shall comply with the requirements of this Standard and the applicable requirements of: a) In Canada, CAN/ULC-S526, Standard for Visible
42、 Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories; b) In the United States, Standard for Visible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories, UL 1638, or Standard for Signaling Devices for the Hearing Impaired, UL 1971, JANUARY 28, 2016
43、CAN/ULC-S541 UL 1480 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1.7 Speakers intended for use with re alarm systems and having integral ampliers shall comply with the requirements in this standard in addition to the requirements in Sta
44、ndard for Ampliers for Fire Protective Signaling Systems, UL 1711, and CAN/ULC-S527, Standarf for Control Units for Fire Alarm Systems. 1.8 Speakers intended for use in air-handling spaces (plenums) shall comply with the requirements in this standard and the requirements in the Standards for Fire Te
45、st for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces, UL 2043 and ULC ORD-C2043. 1.9 These requirements do not cover the following: a) Speakers intended for personal or private consumer use; b) Speakers which are intended for commercial o
46、r professional audio applications; c) Speakers intended for security applications. 2 General 2.1 Components 2.1.1 Except as indicated in 2.1.2 a component of a product covered by this Standard shall comply with the requirements for that component. See Annex A for a list of Standards that apply to co
47、mponents generally used in the products covered by this Standard. 2.1.2 A component need not comply with a specic requirement that: a) Involves a feature or characteristic not needed in the application of the component in the product covered by this Standard; or b) Is superseded by a requirement in
48、this Standard. 2.1.3 A component shall be used in accordance with rating established by manufacturer for the intended conditions of use. JANUARY 28, 2016 CAN/ULC-S541 UL 1480 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.2 Units of meas
49、urement 2.2.1 Unless otherwise indicated, all voltage and current values mentioned in this Standard are root-mean-square (rms). 2.2.2 The metric unit shall be designated as the official unit for purposes of this standard. Where values of measurement are specied in both SI and English units, either unit is used. In cases of dispute, the metric unit shall be used. Values stated without parentheses are the requirement. Values in parentheses are explanatory or appr
