1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1682 Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve TypeUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHT
2、ED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type, UL 1682 Fourth Edition, Dated October 4, 2013 SUMMARY OF TOPICS This revision of ANSI/UL 1682 is being issued
3、 to address the editorial maintenance of UL Standards for Safety. The revision is considered to be non-substantive and not subject to ULs STP process. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights res
4、erved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or
5、implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of t
6、he use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic
7、 versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on
8、 the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that
9、 have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. FEBRUARY 7, 2014 UL 1682 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 7, 2014 UL 1682 tr2 No Text on This Page
10、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CSA C22.2 No. 182.1-13 Fourth Edition Underwriters Laboratories Inc. UL 1682 Fourth Edition Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type October 4, 2013 (Title
11、Page Reprinted: February 7, 2014) ANSI/UL 1682-2013UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”), and Underwriters L
12、aboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL will issue rev
13、isions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-77139-300-3 2013 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard i
14、s subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant
15、 clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2014 Underwriters Laboratories Inc. ULs
16、 Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safet
17、y consists of the Fourth edition including revisions through February 7, 2014. The most recent designation of ANSI/UL 1682 as an American National Standard (ANSI) occurred on October 4, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back)
18、, or the Preface. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit COMM 2000 at http:/m-
19、 help/how_to_order.aspx or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 1 Scope .7 2 Denitions 7 3 General 9 3.1 Components .9 3.2 Reference publications 9 3.3 Units of measurement 13 4 Co
20、nstruction .13 4.1 General 13 4.2 Congurations 14 4.3 Insulating material .14 4.4 Resistance to corrosion 16 4.5 Enclosures .16 4.6 Current-carrying parts 17 4.7 Clearances and creepage distances .17 4.8 Accessibility of live parts .18 4.9 Grounding (bonding) and dead-metal parts .19 4.10 Grounding
21、(bonding) connections 20 4.11 Terminal parts .21 4.12 Pin-type (insulation-piercing) or insulation-displacement terminals 22 4.13 Assembly .22 4.14 Interlocks 23 4.15 Devices intended to accommodate a fuse .23 4.16 Cord or cable grip 24 5 Tests .25 5.1 Representative devices 25 5.2 Accelerated aging
22、 .26 5.3 Comparative tracking index .26 5.4 Glow wire 26 5.5 High-current arc resistance to ignition 27 5.6 Mold stress relief 28 5.7 Moisture absorption resistance 28 5.8 Humidity 29 5.9 Insulation resistance .29 5.10 Dielectric withstand .30 5.11 Conductor secureness 31 5.12 Cord or cable securene
23、ss .31 5.13 Impact (plugs and connectors) .32 5.14 Crush .33 5.15 Withdrawal force .34 5.16 Grounding (bonding) path current 34 5.17 Short circuit withstand (motor rated devices) .35 5.18 Strength of insulating base and support .41 5.19 No-load endurance .42 5.20 Endurance with load 42 5.21 Overload
24、 43 5.22 Abnormal overload .44 5.23 Horsepower rated locked rotor .45 5.24 Electromagnetic (pilot contacts) 45 OCTOBER 4, 2013 CSA C22.2 NO. 182.1-13 UL 1682 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.25 Temperature rise .46 5.26 Res
25、istance to arcing 47 5.27 Polarization integrity 47 5.28 Resistance to corrosion .47 5.29 Moisture resistance .48 5.30 Environmental enclosure type designators .49 5.31 Pin-type (insulation-piercing) or insulation-displacement terminals 49 6 Ratings .53 6.1 General 53 7 Markings 54 7.1 Details .54 7
26、.2 Identication and marking of terminals .61 ANNEX A Component Standards ANNEX B Mandatory English and French Markings for Canada OCTOBER 4, 2013 CSA C22.2 NO. 182.1-13 UL 1682 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is
27、 the harmonized UL and CSA Group Standard for Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type. It is the Fourth edition of CSA C22.2 No. 182.1 and the Fourth edition of UL 1682. This harmonized standard has been jointly revised on February 7, 2014. For this purpose, CSA and UL ar
28、e issuing revision pages dated February 7, 2014. For products intended for use in Canada, general requirements are given in CAN/CSA-C22.2 No. 0. This harmonized Standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the CANENA Technical Harmonization C
29、ommittee are gratefully acknowledged. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was reviewed by the CSA Integrated Committee on Wiring Devices for Household and General Use under the jurisdiction of the CSA Technical
30、 Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This Standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. A UL stan
31、dard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. Where reference is made to a specic number of samples to be tested, the specied number is considered a minimum qua
32、ntity. Note: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. Level of harmonization This Standard is published as an equiv
33、alent Standard. An equivalent Standard is a Standard that is substantially the same in technical content, except as follows. Technical deviations are allowed for Codes and Government Regulations and those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental,
34、climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. Interpretations The interpretation by the SDO of an identical or equivalent Standard
35、 is based on the literal text to determine compliance with the Standard in accordance with the procedural rules of the SDO. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the SDOs to more accurately reect the intent.
36、 FEBRUARY 7, 2014 CSA C22.2 NO. 182.1-13 UL 1682 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group Effective Date The effective date for CSA Group will be announced through CSA Informs or a CSA Group certication notice. UL Effective
37、 Date As of October 4, 2013, all products Listed, Recognized, or Classied by UL must comply with the requirements in this Standard. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved Standard. OCTOBER 4, 2013 CSA C22.2 NO. 182.1-13 UL 1682 6
38、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1 Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eigh
39、t pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC), C22.1, and the National Electrical Code (NEC), ANSI/NFPA 70, using copper conductors, for use in either
40、 indoor or outdoor nonhazardous locations. In Canada, the terminals of a device intended to accommodate aluminum conductors also comply with CSA C22.2 No. 65. 1.2 In the U.S., this standard does not apply to single conductor pin and sleeve devices. 1.3 This standard does not apply to: a) Devices mol
41、ded integrally with exible cord or cable that are covered by UL 817 and CSA C22.2 No. 21; b) General and special use devices, such as attachment plugs, receptacles, cord connectors, inlets, current taps, atiron and appliance plugs, that are covered by UL 498 and CSA C22.2 No. 42, CSA C22.2 No. 57, a
42、nd CSA C22.2 No. 182.2; c) Single and multi-pole connectors intended for connection to copper conductors, for use in data, signal, control and power applications within and between electrical equipment, where exposed, that are covered by UL 1977 and CSA C22.2 No. 182.3; d) Devices intended for use i
43、n hazardous (Classied) locations that are covered by UL 1203 and CSA C22.2 No. 159; and e) Products such as switched interlocks that are covered by UL 508 and CSA C22.2 No. 14. 2 Denitions 2.1 For the purposes of this standard, the following denitions apply. 2.2 CONNECTOR (CABLE CONNECTOR) A portabl
44、e receptacle that is intended to provide power, with means for attachment of exible cord or cable and not intended for permanent mounting. 2.3 CONTACT A conductive element in a component that mates with a corresponding element to provide an electrical path. 2.4 CONTACT, PILOT A conductive element in
45、tended to carry an indicating or controlling signal. 2.5 DELAYED ACTION An arrangement that delays the separation of device housings which is intended to reduce the likelihood of exposure of arcing contacts during the breaking of the circuit when the plug is withdrawn. 2.6 ENCLOSURE The case or hous
46、ing into which the insulator and contacts are assembled. The enclosure system can be composed of elements such as outlet boxes, mounting panels, receptacles, plugs, and connectors. 2.7 GROUNDING (BONDING) PATH A path between the grounding pin, or contact and the grounding terminal or, if the device
47、has no grounding terminal, the point at which the path makes contact with a part of the metal raceway system, such as a box, box cover, or the raceway itself. OCTOBER 4, 2013 CSA C22.2 NO. 182.1-13 UL 1682 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMI
48、SSION FROM UL 2.8 GROUNDING TYPE DEVICE A device having a grounding (bonding) path. 2.9 INSULATION, ELECTRICAL The insulation necessary for the proper functioning of the product and for basic protection against electrical shock. 2.10 INSULATOR That portion of a device that provides for separation an
49、d support of contacts. 2.11 INTERLOCKED RECEPTACLE (OUTLET) An outlet having a device, either electrical or mechanical, that is intended to reduce the likelihood of energizing the contacts before proper engagement with the plug, and that either is intended to reduce the risk of the plug being withdrawn while its contacts are energized or deenergizes the line contacts before separation. 2.12 LOCKING RETAINING MEANS A mechanical arrangement that holds a plug or co
