1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1682 Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION
2、 FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type, UL 1682 Fifth Edition, Dated February 15, 2017 SUMMARY OF TOPICS This Fifth Edition of th
3、e Standard for Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type, UL 1682, is being issued as a Trinational Standard with ANCE and CSA. The new/revised requirements are substantially in accordance with Proposal(s) on this subject dated May 6, 2016 and October 14, 2016. All rights r
4、eserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed o
5、r implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of
6、 the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electron
7、ic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard
8、on the purchasers computer system. FEBRUARY 15, 2017 UL 1682 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 15, 2017 UL 1682 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION
9、 WITHOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-719-ANCE First Edition CSA Group CSA C22.2 No. C22.2 No. 182.117 Fifth Edition Underwriters Laboratories Inc. UL 1682 Fifth Edition Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type February 15, 2017 A
10、NSI/UL 1682-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Gro
11、up”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, an
12、d UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2017
13、Rights reserved in favor of ANCE. ISBN 978-1-4883-0379-1 2017 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions f
14、or its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of
15、the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Ne
16、ither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Fifth Edition. The most recen
17、t designation of ANSI/UL 1682 as an American National Standard (ANSI) occurred on February 15, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals for revisions on any part of the Standard may be su
18、bmitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRO
19、DUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .6 1 Scope .8 2 Denitions8 3 General.10 3.1 Components .10 3.2 Reference publications .11 3.3 Units of measurement17 4 Construction.17 4.1 General 17 4.2 Congurations 17 4.3 Insulating material .17 4.4 Resistance to corrosion 19 4.5
20、 Enclosures .19 4.6 Current-carrying parts 21 4.7 Clearances and creepage distances .21 4.8 Accessibility of live parts .22 4.9 Grounding/bonding and dead-metal parts 23 4.10 Grounding/bonding connections 24 4.11 Terminal parts .25 4.12 Pin-type (insulation-piercing) or insulation-displacement termi
21、nals 26 4.13 Assembly .26 4.14 Interlocks27 4.15 Devices intended to accommodate a fuse .28 4.16 Cord or cable grip 29 5 Tests .29 5.1 Representative devices 29 5.2 Accelerated aging .30 5.3 Comparative tracking index .31 5.4 Glow wire 31 5.5 High-current arc resistance to ignition 31 5.6 Mold stres
22、s relief 32 5.7 Moisture absorption resistance 33 5.8 Humidity34 5.9 Insulation resistance .34 5.10 Dielectric withstand .35 5.11 Conductor secureness 35 5.12 Cord or cable secureness .36 5.13 Impact (plugs and connectors) .37 5.14 Crush .38 5.15 Withdrawal force .39 5.16 Grounding path current (In
23、Mexico and the United States only) 39 5.17 Short circuit withstand (motor rated devices).40 5.18 Strength of insulating base and support .46 5.19 No-load endurance .47 5.20 Endurance with load 47 5.21 Overload 48 5.22 Abnormal overload .49 5.23 Horsepower rated locked rotor .50 5.24 Electromagnetic
24、(pilot contacts) 50 FEBRUARY 15, 2017 NMX-J-719-ANCE CSA C22.2 NO. C22.2 NO. 182.117 UL 1682 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.25 Temperature rise .51 5.26 Resistance to arcing 52 5.27 Polarization integrity 52 5.28 Resistan
25、ce to corrosion .52 5.29 Moisture resistance .53 5.30 Environmental enclosure type designators.54 5.31 Pin-type (insulation-piercing) or insulation-displacement terminals 54 6 Ratings .58 6.1 General 58 7 Markings59 7.1 Details .59 7.2 Identication and marking of terminals .67 SUPPLEMENT SA - REPLAC
26、EMENT PARTS FOR USE WITH SPECIFIC MANUFACTURERS PLUGS, RECEPTACLES, and CABLE CONNECTORS of the PIN and SLEEVE TYPE (MANDATORY) INTRODUCTION SA1 Scope .85 SA2 General 85 SA3 Denitions 85 CONSTRUCTION SA4 General 85 PERFORMANCE SA5 General 86 SA6 Replacement Part Assembly Test .86 MARKINGS SA7 Genera
27、l 87 INSTRUCTIONS SA8 General 87 SUPPLEMENT SB - EQUIPMENT WIRING TERMINALS FOR USE WITH COPPER CONDUCTORS (For Mexico Only) SB1 Mechanical Sequence .89 SB1.1 Secureness test 89 SB1.2 Pullout test.92 ANNEX A (informative) FEBRUARY 15, 2017 NMX-J-719-ANCE CSA C22.2 NO. C22.2 NO. 182.117 UL 1682 4UL C
28、OPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Component Standards ANNEX B (informative) FEBRUARY 15, 2017 NMX-J-719-ANCE CSA C22.2 NO. C22.2 NO. 182.117 UL 1682 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION W
29、ITHOUT PERMISSION FROM UL Preface This is the harmonized ANCE, CSA Group, and UL Standard for Plugs, Receptacles, and Cable ConnectorsofthePinandSleeveType.ItistheFirsteditionofNMX-J-719-ANCE,theFiftheditionofCSA C22.2 No. 182.1, and the Fifth edition of UL 1682. This edition of CSA-C22.2 No. 182.1
30、supersedes the previous edition published in February 2014. This edition of UL 1682 supersedes the previous edition published on February 7, 2014. This harmonized Standard was prepared by the Association of Standardization and Certication, (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL).
31、The efforts and support of the Technical Harmonization Subcommittee, 23H, on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This Standard is considered suitable for use for conformity assessment within the stated scope of the Sta
32、ndard. The present Mexican standard was developed by the CT 23 Accesorios elctricos (Artefactos elctricos) from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the collaboration of the plugs, receptacles and conductors manufacturers and users. This St
33、andard was reviewed by the CSA Integrated Committee on Wiring Devices under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This Standard
34、has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary applicati
35、on of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization This Standard is published as an equivalent Standard. An equivalent Standard is a Standard
36、 that is substantially the same in technical content, except as follows. Technical deviations are allowed for Codes and Government Regulations and those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental, climatic, geographical, technological, or infrastruc
37、tural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. Reasons for Differences From IEC There is no corresponding IEC standard. FEBRUARY 15, 2017 NMX-J-719-ANCE CSA C22.2 NO. C22.2 NO. 182.11
38、7 UL 1682 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the stan
39、dard in accordance with the procedural rulesofthestandardsdevelopmentorganization.Ifmorethanoneinterpretationoftheliteraltexthasbeen identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. FEBRUARY 15, 2017 NM
40、X-J-719-ANCE CSA C22.2 NO. C22.2 NO. 182.117 UL 1682 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1 Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up t
41、o 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I, the National Electrical Code (NEC), ANSI/NFPA 70, and t
42、he Mexican Electrical Code, NOM 001 SEDE, using copper conductors, for use in either indoor or outdoor nonhazardous locations. In Canada, the terminals of a device intended to accommodate aluminum conductors also comply with CSA C22.2 No. 65. 1.2 This standard does not apply to single conductor pin
43、and sleeve devices. Single pole locking-type separable connectors are covered by CSA C22.2 No. 1691/UL 1691. 1.3 This standard does not apply to: a) Devices molded integrally with exible cord or cable that are covered by UL 817, CSA C22.2 No. 21, and NMX-J-195-ANCE; b) General and special use device
44、s, such as attachment plugs, receptacles, cord connectors, inlets, current taps, atiron and appliance plugs, that are covered by UL 498, CSA C22.2 No. 42, CSA C22.2 No. 57, CSA C22.2 No. 182.2, NMX-J-412-ANCE, NMX-J-412/2-1-ANCE, NMX- J-412/2-2-ANCE, NMX-J-412/2-3-ANCE, NMX-J-412/2-4-ANCE, NMX-J-412
45、/2-5-ANCE, and NMX-J-412/2-6-ANCE; c) Single and multi-pole connectors intended for connection to copper conductors, for use in data, signal, control and power applications within and between electrical equipment, where exposed, that are covered by UL 1977 and CSA C22.2 No. 182.3; d) Devices intende
46、d for use in hazardous (Classied) locations that are covered by UL 1203 and CSA C22.2 No. 159; and e) Products such as switched interlocks that are covered by UL 508 and CSA C22.2 No. 14. 2 Denitions 2.1 For the purposes of this standard, the following denitions apply. 2.2 CONNECTOR(CABLECONNECTOR)A
47、portablereceptaclethatisintendedtoprovidepower,with means for attachment of exible cord or cable and not intended for permanent mounting. 2.3 CONTACT A conductive element in a component that mates with a corresponding element to provide an electrical path. 2.4 CONTACT, PILOT A conductive element int
48、ended to carry an indicating or controlling signal. 2.5 DELAYED ACTION An arrangement that delays the separation of device housings which is intended to reduce the likelihood of exposure of arcing contacts during the breaking of the circuit when the plug is withdrawn. FEBRUARY 15, 2017 NMX-J-719-ANC
49、E CSA C22.2 NO. C22.2 NO. 182.117 UL 1682 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.6 ENCLOSURE The case or housing into which the insulator and contacts are assembled. The enclosure system can be composed of elements such as outlet boxes, mounting panels, receptacles, plugs, and connectors. 2.7 GROUNDING/BONDING CONDUCTOR In the U.S. and Mexico, a conductor that is
