1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1699 Arc-Fault Circuit-Interrupters STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT A
2、UTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Arc-Fault Circuit-Interrupters, UL 1699 Third Edition, Dated May 3, 2017 SUMMARY OF TOPICS This new edition of ANSI/UL 1699 includes the following changes: Revision to the Unwanted Tripping Test
3、to Address High Wattage Electronic Dimmers Revision to 37.5 to Include Combination Type AFCIs Revision to Supplement SA Marking Requirements The revised requirements are substantially in accordance with Proposal(s) on this subject dated February 3, 2017. All rights reserved. No part of this publicat
4、ion may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limi
5、ted to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to u
6、se this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for
7、Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system
8、. MAY 3, 2017 UL 1699 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 3, 2017 UL 1699 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 3, 2017 1 UL
9、1699 Standard for Arc-Fault Circuit-Interrupters First Edition February, 1999 Second Edition April, 2006 Third Edition May 3, 2017 This ANSI/UL Standard for Safety consists of the Third Edition. The most recent designation of ANSI/UL 1699 as an American National Standard (ANSI) occurred on May 3, 20
10、17. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, and Title Page. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Develop
11、ment System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of U
12、L. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 1699-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 3, 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL 1699 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER R
13、EPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .8 2 Glossary .8 3 Components9 4 Units of Measurement 10 5 Undated References .10 CONSTRUCTION ALL DEVICES 6 General.10 7 Accessibility of Energized Parts10 8 Corrosion Protection .12 9 Current Carrying Parts12 10 I
14、nternal Wiring12 11 Insulation 12 12 Spacings 12 13 Operating Mechanism .14 14 Programmable Components .14 15 Test Circuit 15 BRANCH/FEEDER ARC-FAULT CIRCUIT-INTERRUPTER 16 General16 17 Terminals 16 17.1 General .16 17.2 Terminal leads .16 17.3 Wire binding screw terminals 16 17.4 Pressure wire term
15、inals .17 18 Enclosure 17 19 Grounding .17 OUTLET CIRCUIT ARC-FAULT CIRCUIT-INTERRUPTER 20 General17 21 Terminals 18 22 Housings 18 23 Grounding .18 PORTABLE ARC-FAULT CIRCUIT-INTERRUPTER 24 General18 25 Plugs/Receptacles 18 26 Cords .19 27 Direct Plug-In 19 28 Grounding .23 29 Enclosures .23 MAY 3,
16、 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL 1699 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CORD ARC-FAULT CIRCUIT-INTERRUPTERS 30 General23 31 Plugs/Receptacles 23 32 Grounding .23 33 Enclosures .24 PERFORMANCE 34 General24 35 Drop and
17、Impact Tests 26 35.1 General .26 35.2 Impact test 26 35.3 Drop test 27 36 Humidity Conditioning .27 37 Leakage Current Measurement .27 38 Voltage Surge Test .29 38.1 General .29 38.2 Unwanted tripping test (Ring wave).29 38.3 Surge immunity test (Combination wave) 32 39 Environmental Test Sequence33
18、 40 Arc Fault Detection Tests 34 40.1 General .34 40.2 Carbonized path arc ignition test .34 40.3 Carbonized path arc interruption test .38 40.4 Carbonized path arc clearing time test 40 40.5 Point contact arc test .42 41 Unwanted Tripping Tests 44 41.1 General .44 41.2 Loading condition I inrush cu
19、rrent 44 41.3 Loading condition II normal operation arcing .44 41.4 Loading condition III non-sinusoidal waveform .45 41.5 Loading condition IV cross talk .46 41.6 Loading condition V multiple load.46 41.7 Loading condition VI lamp burnout47 42 Operation Inhibition Tests47 42.1 General .47 42.2 Mask
20、ing the signal to operate50 42.3 EMI lter 52 42.4 Line impedance 54 43 Dielectric Voltage-Withstand Test .56 44 Resistance to Environmental Noise Test.56 44.1 General .56 44.2 Electrostatic discharge immunity .57 44.3 Radiated electromagnetic eld immunity 57 44.4 Electrical fast transient immunity .
21、57 44.5 Voltage surge 58 44.6 Immunity to conducted disturbances, induced by RF elds 58 44.7 Voltage dips, short interruptions and voltage variations immunity .58 45 Normal Temperature Test59 46 Overvoltage Test .60 47 Overload.60 48 Endurance Test 61 MAY 3, 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL
22、1699 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 49 Abnormal Operations Test .62 50 Surge Current Test .63 50.1 General .63 50.2 Mounting and installation 63 50.3 Surge parameters 63 50.4 Surge polarity 64 51 Abnormal Overvoltage Tests
23、.64 51.1 General .64 51.2 Full phase voltage high current abnormal overvoltage test .65 51.3 Limited current abnormal overvoltage test .67 52 Short Circuit Current Test68 53 Terminal Lead Strain-Relief Test70 54 Power-Supply Cord Strain-Relief Test .70 55 Mechanical Tests .70 56 Crushing Test 71 57
24、Dust Test 71 58 Permanence of Markings 71 59 Reverse Line Load Miswire Test 72 60 Supplemental Voltage Surge Immunity Test72 60.1 General .72 60.2 Surge immunity test (combination wave) 73 RATINGS 61 General74 MARKINGS 62 General74 63 Terminations .75 64 Branch/Feeder Arc-Fault Circuit-Interrupter 7
25、5 65 Combination Arc-Fault Circuit-Interrupter 76 66 Outlet Circuit Arc-Fault Circuit-Interrupter 76 67 Portable and Cord Arc-Fault Circuit-Interrupters 76 INSTRUCTIONS 68 Installation Instructions/Owners Manual .76 SUPPLEMENT SA - AFCIs RATED 120/240 V INTRODUCTION SA1 Scope SA1 CONSTRUCTION SA2 Sp
26、acings .SA1 SA3 Operation .SA1 MAY 3, 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL 1699 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PERFORMANCE SA4 General SA2 SA5 Leakage Current MeasurementSA2 SA6 Voltage Surge Test SA3 SA7 Carbonized Pat
27、h Arc Ignition Test .SA3 SA8 Carbonized Path Arc Interruption TestSA5 SA9 Carbonized Path Arc Clearing Time Test .SA7 SA10 Point Contact Arc Test SA7 SA11 Unwanted Tripping Tests SA7 SA11.1 Loading condition I inrush current SA7 SA11.2 Loading condition II normal operation arcing .SA7 SA11.3 Loading
28、 condition IV cross talk.SA8 SA12 Operation Inhibition Tests .SA8 SA12.1 General .SA8 SA12.2 Masking the signal to operate .SA9 SA12.3 Short circuit current test .SA11 SA13 Ratings.SA11 SUPPLEMENT SB - LEAKAGE-CURRENT DETECTOR-INTERRUPTERS (LCDIs) INTRODUCTION SB1 Scope SB1 SB2 GlossarySB1 CONSTRUCT
29、ION SB3 General SB1 SB4 Cords SB2 SB5 Spacings .SB2 SB6 Test Circuit .SB3 PERFORMANCE SB7 General SB3 SB8 LCDI Trip Threshold Test .SB4 SB9 LCDI Supervisory Circuit Test .SB4 SB10 Arc Fault Detection TestsSB5 SB10.1 Carbonized path arc clearing time test SB5 SB10.2 Point contact arc test .SB5 SB11 U
30、nwanted Tripping Tests SB5 SB12 Operation Inhibition Tests .SB6 SB12.1 Masking the signal to operate .SB6 SB13 Resistance to Environmental Noise Test SB7 SB13.1 General .SB7 SB14 Supplemental Voltage Surge Immunity Test .SB8 SB14.1 Surge immunity test (combination wave) SB8 RATINGS MAY 3, 2017 ARC-F
31、AULT CIRCUIT-INTERRUPTERS - UL 1699 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SB15 General .SB8 MARKINGS SB16 General .SB8 APPENDIX A Standards for ComponentsA1 MAY 3, 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL 1699 7UL COPYRIGHTED MATE
32、RIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 The requirements of this Standard cover arc-fault circuit-interrupters (AFCIs) of the branch/feeder, outlet circuit, portable, and cord type intended for use in dwelling units. These devi
33、ces are intended to mitigate the effects of arcing faults that may pose a risk of re ignition under certain conditions if the arcing persists. 1.2 AFCIs have a maximum rating of 20 A and are intended for use in 120-V ac, 60-HZ circuits. Cord AFCIs are rated up to 30 A. 1.3 These devices are not inte
34、nded to detect glowing connections. 1.4 In these requirements the term device is used generically to apply to all of the devices covered by these requirements and is modied when the requirement does not apply to all types. 1.5 An AFCI that is also intended to perform other functions, such as overcur
35、rent protection, ground-fault circuit-interruption, surge suppression, any other similar functions, or any combination thereof, shall comply additionally with the requirements of the applicable Standard or Standards that cover devices that provide those functions. 1.6 This standard contains a supple
36、ment covering the requirements for Leakage-Current Detector-Interrupters. 2 Glossary 2.1 For the purposes of this Standard, the following denitions apply. 2.2 ARCING A luminous discharge of electricity across an insulating medium, usually accompanied by the partial volatilization of the electrodes.
37、2.3 ARCING FAULT An unintentional arcing condition in a circuit. 2.4 ARC-FAULT CIRCUIT-INTERRUPTER (AFCI) A device intended to mitigate the effects of arcing faults by functioning to deenergize the circuit when an arc-fault is detected. 2.5 BRANCH/FEEDER ARC-FAULT CIRCUIT-INTERRUPTER A device intend
38、ed to be installed at the origin of a branch circuit or feeder, such as at a panelboard. It is intended to provide protection of the branch circuit wiring, feeder wiring, or both, against unwanted effects of arcing. This device also provides limited protection to branch circuit extension wiring. It
39、may be a circuit-breaker type device or a device in its own enclosure mounted at or near a panelboard. 2.6 CARBONIZED PATH A conductive carbon path formed through or over the surface of a normally insulating material. MAY 3, 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL 1699 8UL COPYRIGHTED MATERIAL NOT
40、AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.7 COMBINATION ARC-FAULT CIRCUIT-INTERRUPTER An AFCI which complies with the requirements for both branch/feeder and outlet circuit AFCIs. It is intended to protect downstream branch circuit wiring and cord sets and powe
41、r-supply cords. 2.8 CORD ARC-FAULT CIRCUIT-INTERRUPTER A plug-in device intended to be connected to a receptacle outlet. It is intended to provide protection to the power-supply cord connected to it against the unwanted effects of arcing. The cord may be integral to the device. The device has no add
42、itional outlets. 2.9 MICROELECTRONICS Monolithic, hybrid, or module circuits, where the internal circuit connections are not accessible exclusive of provided external connection pins or pads. The circuits are capable of functioning in the analogue mode, digital mode, or a combination of the two mode
43、s. Examples of microelectronics include: ASICs, ROMs, RAMs, PROMs, EPROMs, PALs, and PLDs. See 2.13. 2.10 OPERATION INHIBITION Denotes the concealment of an arcing fault by the normal operation of certain circuit components. 2.11 OUTLET CIRCUIT ARC-FAULT CIRCUIT-INTERRUPTER A device intended to be i
44、nstalled at a branch circuit outlet, such as at an outlet box. It is intended to provide protection of cord sets and power-supply cords connected to it (when provided with receptacle outlets) against the unwanted effects of arcing. This device may provide feed-through protection of the cord sets and
45、 power-supply cords connected to downstream receptacles. 2.12 PORTABLE ARC-FAULT CIRCUIT-INTERRUPTER A plug-in device intended to be connected to a receptacle outlet and provided with one or more outlets. It is intended to provide protection to connected cord sets and power-supply cords against the
46、unwanted effects of arcing. 2.13 PROGRAMMABLE COMPONENT Any microelectronic hardware that can be programmed in the design center, the factory, or in the eld. Here the term programmable is taken to be any manner in which one can alter the software wherein the behavior of the component can be altered.
47、 The microelectronics dened in 2.9 are examples of programmable components. 2.14 UNWANTED TRIP A tripping function in response to a condition that is not an arcing fault but a condition that occurs as part of the normal or anticipated operation of circuit components. 3 Components 3.1 Except as indic
48、ated in 3.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components generally used in the products covered by this standard. 3.2 A component is not required to comply with a specic requiremen
49、t that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. MAY 3, 2017 ARC-FAULT CIRCUIT-INTERRUPTERS - UL 1699 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3.3 A component shall be used in accordance with its rating established for the intended conditions of use. 3.4 Specic com
