UL 250 CRD-2009 UL Standard for Safety Household Refrigerators and Freezers - Section Paragraph Reference 11 2 Subject Electronic Media Instructions (Edition 10 November 01 1993)《.pdf

上传人:roleaisle130 文档编号:1067958 上传时间:2019-04-02 格式:PDF 页数:2 大小:12.15KB
下载 相关 举报
UL 250 CRD-2009 UL Standard for Safety Household Refrigerators and Freezers - Section  Paragraph Reference 11 2 Subject Electronic Media Instructions (Edition 10 November 01 1993)《.pdf_第1页
第1页 / 共2页
UL 250 CRD-2009 UL Standard for Safety Household Refrigerators and Freezers - Section  Paragraph Reference 11 2 Subject Electronic Media Instructions (Edition 10 November 01 1993)《.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a

2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): SHZZ, SHMRStandard Number: UL 250Edition Date: November 1, 1993Edition Number: 10Section / Paragraph Reference: 11.2Subject: Electronic Media InstructionsDEC

3、ISION:Add the following new paragraphs.11.2.7.1 (New) The following instructions shall be provided in an instruction sheet, manual, booklet orsimilar printed material and shall be repeated in any electronic media instructions provided:a) The instructions and warning statements required by paragraphs

4、 11.2.3 11.2.6.b) Installation instructions relating to the stability of the refrigerator.All other instructions may be provided in electronic read-only media format, such as CD-ROM or webaccessible URL.11.2.7.2 (New) The printed instruction material referenced in 11.2.7.1 shall contain detailed ins

5、tructions ofhow to obtain a printed copy of the material contained in electronic format.RATIONALE FOR DECISION:UL 250 specifies that installation and operating instructions shall be provided with the appliance. In thepast, these instructions have typically been provided in hard copy printed format.

6、However, for a varietyof reasons, manufacturers are looking at other means to provide this important information. Instructionsrequired by UL 250 must be readily available to the user. The addition of paragraphs 11.2.7.1 and 11.2.7.2outlines the requirements regarding the use of electronic media and

7、identifies those instructions that mustbe provided as hard copy printed instructions.Copyright 2009 Underwriters Laboratories Inc.UL, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or tha

8、t they will be recognized or adoptedby anyone. Certification Requirement Decisions are the opinion of Underwriters Laboratories Inc. inpractically applying the requirements of the standard. They do not represent formal interpretations of thestandard under American National Standards Institute (ANSI)

9、 processes. UL shall not be responsible toanyone for the use of or reliance upon Certification Requirement Decisions by anyone. UL shall not incurany obligation or liability for damages, including consequential damages, arising out of or in connectionwith the use or reliance upon Certification Requi

10、rement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis document is published as a service to ULs certification customersSTANDARD NUMBER: UL 250 -2-

展开阅读全文
相关资源
猜你喜欢
  • GOST 16057-1970 Hermetable flange union elbows with slope angle 135 for tube connections on internal cone Construction and dimensions《内圆锥管路连接135倾斜角密封式法兰弯 头 结构及尺寸》.pdf GOST 16057-1970 Hermetable flange union elbows with slope angle 135 for tube connections on internal cone Construction and dimensions《内圆锥管路连接135倾斜角密封式法兰弯 头 结构及尺寸》.pdf
  • GOST 16058-1970 Union tees for tube connections on internal cone Construction and dimensions《内圆锥管路连接用直通三通 结构及尺寸》.pdf GOST 16058-1970 Union tees for tube connections on internal cone Construction and dimensions《内圆锥管路连接用直通三通 结构及尺寸》.pdf
  • GOST 16059-1970 Reducer type tees for tube connections on internal cone Construction and dimensions《内圆锥管路连接用异径三通 结构及尺寸》.pdf GOST 16059-1970 Reducer type tees for tube connections on internal cone Construction and dimensions《内圆锥管路连接用异径三通 结构及尺寸》.pdf
  • GOST 16060-1970 Reducer type tees with thread diameter 14 mm on middle fitting for tube connections on internal cone Construction and dimensions《内圆锥管路连接用中间接头上带直径14mm螺纹异径三通 结构及尺寸》.pdf GOST 16060-1970 Reducer type tees with thread diameter 14 mm on middle fitting for tube connections on internal cone Construction and dimensions《内圆锥管路连接用中间接头上带直径14mm螺纹异径三通 结构及尺寸》.pdf
  • GOST 16061-1970 Flange union tees for tube connections on internal cone Construction and dimensions《内圆锥管连接用法兰中间三通接头 结构和尺寸规格》.pdf GOST 16061-1970 Flange union tees for tube connections on internal cone Construction and dimensions《内圆锥管连接用法兰中间三通接头 结构和尺寸规格》.pdf
  • GOST 16062-1970 Flange union tees asymmetric for tube connections on internal cone Construction and dimensions《内圆锥管路连接用不对称法兰三通 结构及尺寸》.pdf GOST 16062-1970 Flange union tees asymmetric for tube connections on internal cone Construction and dimensions《内圆锥管路连接用不对称法兰三通 结构及尺寸》.pdf
  • GOST 16063-1970 Flange union tees hermetable for tube connections on internal cone Construction and dimensions《内圆锥管路连接用密封式法兰三通 结构及尺寸》.pdf GOST 16063-1970 Flange union tees hermetable for tube connections on internal cone Construction and dimensions《内圆锥管路连接用密封式法兰三通 结构及尺寸》.pdf
  • GOST 16064-1970 Flange union tees asymmetric hermetable for tube connections on internal cone Construction and dimensions《内圆锥管连接不对称法兰中间三通接头 结构和尺寸规格》.pdf GOST 16064-1970 Flange union tees asymmetric hermetable for tube connections on internal cone Construction and dimensions《内圆锥管连接不对称法兰中间三通接头 结构和尺寸规格》.pdf
  • GOST 16065-1970 Union crosses for tube connections on internal cone Construction and dimensions《内圆锥管路连接用直通四通 结构及尺寸》.pdf GOST 16065-1970 Union crosses for tube connections on internal cone Construction and dimensions《内圆锥管路连接用直通四通 结构及尺寸》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1