1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 44 Thermoset-Insulated Wires and Cables STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL N
2、OT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Thermoset-Insulated Wires and Cables, UL 44 Nineteenth Edition, Dated JANUARY 9, 2018 Summary of Topics This new edition of ANSI/UL 44 has been issued to: Add a reference to the Length of Lay
3、 test in UL 2556, CSA C22.2 No. 2556, or NMX-556-ANCE at 4.1.5.7 to specify how to determine the length of lay. Add ASTM B801, B901, and B902 to the reference publication section since these standards are referenced in Table 3. Expand the denitions in the glossary for “lled” and “unlled” require gre
4、ater specicity as to what materials beyond the characteristic constituent polymer(s) make up the ller. Revise 4.1.5.1.2 to replace 22 AWG with 24 AWG as the smallest size of aluminum strands that can be used. Revise 4.1.5.7(a) to permit compressed single input conductors to have other than reversed
5、direction of strand layers. Revise 4.1.6.1 to clarify that diameter requirements for conductor classes not referenced in Tables 5-10 do not need to be dened. Revise 4.1.7 to allow butt-spliced 8 AWG stranded conductors. Revise requirements align with the proposed new edition to Thermoplastic-Insulat
6、ed Wires and Cables, CSA C22.2 No. 75, UL 83, or NMX-J-010. Add a statement to 4.2.2 to clarify in Mexico, repairs to nished conductors are not permitted. Revise 4.5.2 to indicate Table 26 applies to both bare and insulated Equipment-Grounding Conductors. Revise 5.3.1.2 to cover cases where the cent
7、er strand consists of more than one wire and to include requirements for specimens taken from a center strand. Revise Long Term Insulation Resistance tests (5.4 and 5.5) and stability acceptance criteria for clearer interpretation of the LTIR test procedure and stability requirements. Revise the tes
8、t requirement for capacitance and relative permittivity at 5.6.1 to assign tolerances to the specied immersion temperatures. Revise the test requirement for conductor corrosion at 5.7 to specify the temperature and duration of the test. Add a country difference to the test requirement for hot-creep
9、elongation and hot-creep set at 5.13. Clarify section title for 5.14.2 to specify the requirement applies to XL insulation types only. JANUARY 9, 2018 UL 44 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Revise the optional FV-2/VW1 vert
10、ical specimen test in 5.14.4.1 to clarify that the requirements apply only to the vertical ame aspect of the test and not the horizontal ame portion. Revise the optional weather (sunlight) resistance test in 5.15 to increase the exposure duration in Canada. Revise 5.16 5.17 to indicate that a wire t
11、hat complies with the requirements for PR II also must compy with those for PR I. Revise the optional marking requirement for gasoline and oil resistance, 5.17.1. Revise requirement in 5.18.1 for 1200 lbf crush on 14 AWG specimens “and/or” 1800 lbf crush on 2 AWG specimens to include circumstances f
12、or testing both specimen. Revise 5.22 to specify the projected elongation requirement applies to both the insulation and jacket. Add a reference to Table 5, Conductor diameter and cross-sectional area in 6.1.4 to ensure the correct mm 2 value is marked. Add new 6.1.5 to specify that wire is required
13、 to be marked when other than those with ASTM Class B, C or SIW stranding. Revise optional ame test marking requirement in 6.1.10.1(d) to include the option to use FT4/IEEE 1202 marking. Revise the note that follows 6.1.10.1 to make it clear that the CEC species this only for certain conditions and
14、cables. Add a note to 7.1 to indicate In Canada, the minus 40C rating is required as specied in the CE Code, Part I. Add 1000 V rating to the US type designations. Indicate that this option is only for use in the United States. Revise Table 2, type of stranding for aluminum to match what is specied
15、for copper. Revise Table 8 to address adding diameters for sizes 12-2 AWG and to the title to include single input wire. Expand Table 16, Thicknesses of insulation on 1000 V Types RW75, R90, and RW90 to include thickness requirements for the inner and outer layers of composite insulation and to perm
16、it the inner layer of composite insulation in RW75, RW90 and R90 to be other than silicone. Add new Table 19, Thickness of composite insulations on 1000 V Types RWU75 and RWU90. Add Annex F for requirements for rope-lay stranded exible conductors. Revise Annex K for editorial purposes in K.1, K.2.3,
17、 and K.3.1; to include extruded semi- conducting material in K.2.2; and to references back to test requirements. The new and revised requirements are substantially in accordance with Proposal(s) on this subject dated July 1, 2016, February 3, 2017, and August 25, 2017. JANUARY 9, 2018 UL 44 tr2UL CO
18、PYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwis
19、e without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, ind
20、irect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for a
21、ny damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable a
22、ttorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. JANUARY 9, 2018 UL 44 tr3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 9, 2018 UL
23、44 tr4 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-451-ANCE-2018 Sixth Edition CSA Group CSA C22.2 No. 38-18 Eleventh Edition Underwriters Laboratories Inc. UL 44 N
24、inteenth Edition Thermoset-Insulated Wires and Cables JANUARY 9, 2018 ANSI/UL 44-2018UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certicat
25、ion (ANCE), the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing acc
26、ording to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing
27、the same date of issue as the CSA Group and UL pages. Copyright 2018 ANCE Rights reserved in favor of ANCE. ISBN 9781488304897 2018 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subj
28、ect to review within ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard
29、designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2018 Unde
30、rwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. T
31、his ANSI/UL Standard for Safety consists of the Nineteenth Edition. The most recent designation of ANSI/UL 44 as an American National Standard (ANSI) occurred on January 9, 2018. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Pref
32、ace. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. The Department of Defense (DoD) has adopted UL 44 on April 5, 1985. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or
33、 proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit ULs Standards Sales Site at http:/ HowToOrder.asp
34、x or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 1 Scope .8 2 General 8 2.1 Units of measure .8 2.2 Reference publications 8 2.3 General requirements 12 3 Denitions 12 4 Construction.13 4.
35、1 Conductors .13 4.2 Insulation .18 4.3 Jackets or brous coverings over single conductors .19 4.4 Shielding (optional) 20 4.5 Multiple-conductor cables.20 4.6 Color coding 21 4.7 Fillers and protective materials 23 4.8 Jacket separators .23 4.9 Jackets 23 4.10 Evaluation of new materials Establishme
36、nt of dry temperature rating of alternative insulation and jacketing materials for use in this Standard .24 4.11 Assemblies that include single-conductor thermoset-insulated wires 24 5 Test Requirements .24 5.1 General 24 5.2 Conductor resistance 25 5.3 Tests on aluminum conductors 25 5.4 Long-term
37、insulation resistance in water26 5.5 Long-term insulation resistance in air for 90C rated conductors 27 5.6 Capacitance and relative permittivity .28 5.7 Conductor corrosion .28 5.8 Insulation fall-in .28 5.9 Heat shock of thermoplastic jacket 28 5.10 Flexibility of separator under a thermoplastic j
38、acket.29 5.11 Cold bend and cold impact 29 5.12 Deformation .30 5.13 Hot-creep elongation and hot-creep set .30 5.14 Flame and smoke 30 5.15 Weather (sunlight) resistance (optional) .34 5.16 Oil resistance (optional) .35 5.17 Gasoline and oil resistance (optional) .35 5.18 Crushing resistance 35 5.1
39、9 Dielectric breakdown after glancing impact 36 5.20 Durability of ink printing .36 5.21 Shrinkback 36 5.22 Evaluation of new materials establishment of temperature rating .36 5.23 AC spark test 37 5.24 Dielectric voltage-withstand in water 37 5.25 Insulation resistance in water at 15C.37 5.26 Elect
40、rical continuity .38 6 Marking.38 6.1 Marking on product 38 JANUARY 9, 2018 NMX-J-451-ANCE-2018 CSA C22.2 NO. 38-18 UL 44 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 6.2 Marking on package .42 7 Deep-Well Submersible Water-Pump Cable .4
41、2 7.1 General 42 7.2 Construction 43 7.3 Markings .44 7.4 Tests 46 TABLES .46 Annex A (informative) Conductor types covered by this Standard (See 1.1) Annex B (informative) Summary of requirements (See 1.1) Annex C (normative) Chemical composition of aluminum conductors (See 1.1) Annex D (normative)
42、 Copper-clad aluminum conductors (See 4.1.3) D.1 General.91 D.2 Sizes and stranding 91 D.3 Conductor resistance .91 D.4 Physical properties .91 D.5 Marking requirements 91 Annex E (informative) Metric sizes (See 4.1.5.1) Annex F (informative) Rope-lay stranded exible conductors (See 4.1.5.1) Annex G
43、 (normative) Protective coverings other than jackets (See 4.3.1 and 4.9.1.1) G.1 General.97 G.2 Tapes 97 G.3 Cotton braids97 G.3.1 General 97 G.3.2 Coverage 98 G.4 All-glass and glass/cotton braids101 G.4.1 General .101 G.4.2 Glass content 102 G.5 Cotton wraps and servings.102 G.5.1 General .102 G.5
44、.2 Coverage .103 G.6 Glass wraps .104 JANUARY 9, 2018 NMX-J-451-ANCE-2018 CSA C22.2 NO. 38-18 UL 44 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL G.7 Braids and wraps .104 G.8 Saturation of brous coverings other than tapes 104 G.9 Finish
45、.106 Annex H (normative for Canada) Color identication of circuit conductors (See 4.6.2.2 and 7.2.5.1) Annex I (normative) Formulas for calculating insulation resistance of types having parameters other than as specied in this Standard (See 5.4.1.2) Annex J (normative) Alternative national markings
46、(See 6.1.1.3 and 7.3.1.3) Annex K (normative) Requirements for Types RW75, R90, and RW90 rated 5000 V (See Table 1 and Annex B) K.1 General115 K.2 Construction115 K.2.1 Conductors 115 K.2.2 Conductor shielding 115 K.2.3 Insulation 115 K.2.4 Jackets .115 K.3 Tests 115 K.3.1 Long-term insulation resis
47、tance in water.115 K.3.2 Insulation resistance in air for Type R90, rated 5000 V116 K.3.3 Dielectric voltage-withstand in water 116 K.3.4 Insulation resistance in water at 15C .116 K.3.5 Resistivity of extruded semiconducting shielding .116 JANUARY 9, 2018 NMX-J-451-ANCE-2018 CSA C22.2 NO. 38-18 UL
48、44 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the harmonized ANCE, CSA Group, and UL standard for Thermoset-Insulated Wires and Cables. It is the Sixth edition of NMX-J-451-ANCE, the Eleventh edition of CSA C22.2 No. 38
49、, and the Nineteenth edition of UL 44. This edition of NMX-J-451-ANCE supersedes the previous edition published in March 28, 2014. This edition of CSA C22.2 No. 38 supersedes the previous edition published in March 28, 2014. This edition of UL 44 supersedes the previous edition published in March 28, 2014. This harmonized standard was prepared by the Association of Standardization and Certication, (ANCE), CSA Group and Underwriters
