UL 563 CRD-2017 UL Standard for Safety Ice Makers - Section Paragraph Reference 64 Subject Electronic Media Instructions (Edition 8 July 31 2009).pdf

上传人:inwarn120 文档编号:1068307 上传时间:2019-04-02 格式:PDF 页数:2 大小:28.42KB
下载 相关 举报
UL 563 CRD-2017 UL Standard for Safety Ice Makers - Section  Paragraph Reference 64 Subject Electronic Media Instructions (Edition 8 July 31 2009).pdf_第1页
第1页 / 共2页
UL 563 CRD-2017 UL Standard for Safety Ice Makers - Section  Paragraph Reference 64 Subject Electronic Media Instructions (Edition 8 July 31 2009).pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared by UL LLC. It is normative for the applicable ULProduct Certification Program(

2、s); however, it is currently not part of the UL Standard(s) referencedbelow.Product Category (CCN): SJBVStandard Number: UL 563Standard Title: Standard for Ice MakersEdition Date: July 31, 2009Edition Number: 8Section / Paragraph Reference: 64Subject: Electronic Media InstructionsDECISION:64 Install

3、ation and Operating Instructions64.3 With reference to 64.1, the instructions required by 64.5 64.6 and SA6.2 shall be provided asprinted material. All other instructions may be provided in electronic read-only media format, such as suchas DVD, website (accessible via URL, QR code, or similar means)

4、 flash drive or CD-ROM. If electronicmedia instructions are provided, the instructions and warning statements required by 64.5 64.6 andSA6.2 shall also be included within the electronic media instructions.64.4 The printed instruction material referenced in 64.3 shall contain detailed instructions o

5、f how to obtaina printed copy of the material contained in electronic format.64.5 The instructions shall specify the minimum installation clearances to be maintained for refrigeratorsthat are intended for installation with other than zero inch clearances, and have been tested with theenclosure space

6、d from the refrigerator in accordance with 35.5.64.6 Additional instructions are specified in paragraphs 5.2.1, 5.2.3, 6.8, 6.9, 9.1.7, 43.3, 61.2(d), 61.21,and 61.22.RATIONALE FOR DECISION:UL specifies that any markings, installation and operating instructions shall be provided with the appliance.I

7、n the past, these instructions have typically been provided in hard copy printed format along withadditional non-safety information that is not required by the Standard. For a variety of reasons,manufacturers are looking at other means to provide this important information. Instructions required byU

8、L 563 must be readily available to the user.This Certification Requirement Decision is intended to document the requirements for the use of electronicinstructions, identifying those instructions that must be provided as hard copy printed instructions, andthose required on printed instructions indica

9、ting how to obtain a copy of the material contained in theelectronic media via phone and /or company website. Electronic Media Instructions have already beenadopted and utilized across other Major Appliance Standards, such as UL 197, UL 471, UL 858, and UL923Copyright 2017 UL LLCUL COPYRIGHTED MATER

10、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL LLC, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby an

11、yone. Certification Requirement Decisions are the opinion of UL LLC. in practically applying therequirements of the standard. They do not represent formal interpretations of the standard underAmerican National Standards Institute (ANSI) processes. UL LLC shall not be responsible to anyone forthe use

12、 of or reliance upon Certification Requirement Decisions by anyone. UL LLC shall not incur anyobligation or liability for damages, including consequential damages, arising out of or in connection withthe use or reliance upon Certification Requirement Decisions. The electronic version of the CertificationRequirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersSTANDARD NUMBER: UL 563 -2-

展开阅读全文
相关资源
猜你喜欢
  • ASTM D3596-2014 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins《通用聚氯乙烯 (PVC) 树脂中凝胶 (斑点) 测定的标准实施规程》.pdf ASTM D3596-2014 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins《通用聚氯乙烯 (PVC) 树脂中凝胶 (斑点) 测定的标准实施规程》.pdf
  • ASTM D3681-2012e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition.pdf ASTM D3681-2012e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition.pdf
  • ASTM D4625-2016e1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 C (110 F)《在43摄氏度(110 F)下的中间馏分燃料储存稳定性的标准测试方法》.pdf ASTM D4625-2016e1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 C (110 F)《在43摄氏度(110 F)下的中间馏分燃料储存稳定性的标准测试方法》.pdf
  • ASTM D4680-1998(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷法(木材对木材)测定胶粘剂静剪切蠕变和破坏时间的标准试验方法》.pdf ASTM D4680-1998(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷法(木材对木材)测定胶粘剂静剪切蠕变和破坏时间的标准试验方法》.pdf
  • ASTM D4682-1987(2002) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性》.pdf ASTM D4682-1987(2002) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性》.pdf
  • ASTM D4682-2008 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规范》.pdf ASTM D4682-2008 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规范》.pdf
  • ASTM D4682-2013 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规格》.pdf ASTM D4682-2013 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规格》.pdf
  • ASTM D4682-2018 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants.pdf ASTM D4682-2018 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants.pdf
  • ASTM D4683-2004 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator《用锥形承载模拟器在高剪切率和高温下测量粘度的标准试验方法》.pdf ASTM D4683-2004 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator《用锥形承载模拟器在高剪切率和高温下测量粘度的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1