1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60335-2-34 Household and Similar Electrical Appliances Safety Part 2-34: Particular Requirements for Motor-Compressors STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER R
2、EPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Household and Similar Electrical Appliances Safety Part 2-34: Particular Requirements for Motor-Compressors, UL
3、60335-2-34 Sixth Edition, Dated November 3, 2017 Summary of Topics The following is the Sixth Edition of ANSI/UL 60335-2-34, the common CSA Group and UL (binational) standard that is an adoption of IEC 60335-2-34, Safety Standard for of Household and Similar Electrical Appliances Safety Part 2-34: P
4、articular Requirements for Motor- Compressors (IEC 60335-2-34, Edition 5.2:2016.) The new requirements are substantially in accordance with Proposal(s) on this subject dated March 24, 2017 and July 7, 2017. All rights reserved. No part of this publication may be reproduced, stored in a retrieval sys
5、tem, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantabilit
6、y or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL
7、 representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL h
8、armless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. NOVEMBER 3, 2017 UL 60335-2-34 tr1UL COPYRIGHT
9、ED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 3, 2017 UL 60335-2-34 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CAN/CSA-C22.2 No. 60335-2-34:17 S
10、econd Edition (IEC 60335-2-34:2012+A1:2015+A2:2016, MOD) Underwriters Laboratories Inc. UL 60335-2-34 Sixth Edition Household and Similar Electrical Appliances Safety Part 2-34: Particular Requirements for Motor-Compressors November 3, 2017 This national standard is based on publication IEC 60335-2-
11、34, Edition 5.2:2016 (Edition 5:2012 consolidated with amendment 1:2015 and its corrigendum 1:2015, and amendment 2:2016). ANSI/UL 60335-2-34-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issu
12、ed jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at anytime. Revisions to this standard will be made only after processing according
13、 to the standards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-4883-0830-7 2017 CSA Group All rights reserved. No part of this publication may be rep
14、roduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review within ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following
15、 information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Group
16、s Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, own
17、erships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Sixth Edition. The most recent designation of ANSI/UL 60335-2-34 as an American National Standard (ANSI) occurred on November 3, 2017. ANSI approval for
18、a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted
19、to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit ULs Standards Sales Site at http:/ HowToOrder.aspx or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORI
20、ZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 NATIONAL DIFFERENCES . 9 FOREWORD . 10 INTRODUCTION . 14 1 Scope 16 2 Normative references .17 3 Terms and denitions 19 4 General requirement .22 5 General conditions for the tests 22 6 Classication 24 7 Marki
21、ng and instructions 25 8 Protection against access to live parts 26 9 Starting of motor-operated appliances 26 10 Power input and current .27 11 Heating 27 12 Void .27 13 Leakage current and electric strength at operating temperature 27 14 Transient overvoltages 27 15 Moisture resistance .27 16 Leak
22、age current and electric strength .27 17 Overload protection of transformers and associated circuits 27 18 Endurance .28 19 Abnormal operation .28 20 Stability and mechanical hazards .35 21 Mechanical strength .35 22 Construction .35 23 Internal wiring 40 24 Components .40 25 Supply connection and e
23、xternal exible cords 42 26 Terminals for external conductors .42 27 Provision for earthing 42 28 Screws and connections .42 29 Clearances, creepage distances and solid insulation 42 30 Resistance to heat and re 43 31 Resistance to rusting 45 32 Radiation, toxicity and similar hazards .45 NOVEMBER 3,
24、 2017 CAN/CSA-C22.2 NO. 60335-2-34:17 UL 60335-2-34 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annexes Annex C (normative) Ageing test on motors Annex D (normative) Thermal motor protectors Annex AA (normative) Running overload tests f
25、or motor-compressors classied as tested with Annex AA Annex BB (normative) Winding wire insulation compatibility tests Annex CC (normative) Tie cords and insulation compatibility tests Annex DD (normative) Non-sparking “n” electrical apparatus Annex DVA (normative) North American additional requirem
26、ents Annex 101.DVA (normative) Accelerated Aging Tests Gaskets Annex 101.DVB (informative) Pressure code Annex 101.DVC (normative) Nonmetallic materials 101.DVC.1 General .70 101.DVC.2 Electrical properties .70 101.DVC.3 Mechanical properties .70 101.DVC.4 Thermal properties .71 101.DVC.5 Ultraviole
27、t light exposure 71 Annex 101.DVD (normative) Bypass valve testing Annex 101.DVE (informative) Supplemental requirements Annex 101.DVF (informative) Optional fatigue test 101.DVF.5 Fatigue cycle test specication .74 NOVEMBER 3, 2017 CAN/CSA-C22.2 NO. 60335-2-34:17 UL 60335-2-34 4UL COPYRIGHTED MATER
28、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex 101.DVG (informative) Optional pressure tests Annex 101.DVH (informative) Maximum continuous current test Annex 101.DVI (normative) Requirements for motor-compressors rated over 600 volts to 15 000 volts 101
29、.DVI.1 Scope .81 101.DVI.2 Components 81 101.DVI.3 Clearances, creepage distances and solid insulation .81 Annex 101.DVJ (normative) Hydrostatic strength testing of internal motor protective devices 101.DVJ.1 Scope .82 101.DVJ.2 Hydrostatic strength testing of internal motor protective devices 82 An
30、nex 101.DVK (informative) Optional winding wire insulation compatibility tests for motorettes/coilettes Bibliography NOVEMBER 3, 2017 CAN/CSA-C22.2 NO. 60335-2-34:17 UL 60335-2-34 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This
31、 is the harmonized CSA Group and UL standard for particular requirements for motor-compressors. It is the second edition of CAN/CSA-C22.2 No. 60335-2-34, and the sixth edition of UL 60335-2-34. This edition of CAN/CSA-C22.2 No. 60335-2-34 supersedes the previous edition published on March 22, 2013.
32、This edition of UL 60335-2-34 supersedes the previous edition published on March 22, 2013. This harmonized standard is based on IEC Publication 60335-2-34: Edition 5.2, Household and Similar Electrical Appliances Safety Part 2-34: Particular Requirements for Motor-Compressors, issued November 2016.
33、IEC 60335-2-34 is copyrighted by the IEC. This harmonized Standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the motor-compressor manufacturing industry are gratefully acknowledged. This standard is considered suitable for use for conformity assess
34、ment within the stated scope of the standard. This Standard was reviewed by the CSA Subcommittee on Household Appliances for Refrigeration, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrica
35、l Safety, and has been formally approved by the CSA Technical Committee. This Standard was also reviewed and approved by ULs Standards Technical Panel for Heating and Cooling Equipment Particular Requirements for Motor-Compressors, STP 60335-2-34. This Standard has been approved as a National Standa
36、rd of Canada by the Standards Council of Canada (SCC) and approved by the American National Standards Institute (ANSI) for publication as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered
37、a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. CAN/CSA-C22.2 No. 60335-2-34 is to be used in co
38、njunction with the second edition of CAN/CSA-C22.2 No. 60335-1:16. The requirements for motor-compressors are contained in this Part 2 Standard and CAN/CSA-C22.2 No. 60335-1:16. Requirements of this Part 2 Standard, where stated, amend the requirements of CAN/CSA-C22.2 No. 60335-1:16. Where a partic
39、ular subclause of CAN/CSA-C22.2 No. 60335-1:16 is not mentioned in CAN/CSA-C22.2 No. 60335-2-34, the CAN/CSA-C22.2 No. 60335-1:16 subclause applies. UL 60335-2-34 is to be used in conjunction with the sixth edition of UL 60335-1. The requirements for motor-compressors are contained in this Part 2 St
40、andard and UL 60335-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60335-1. Where a particular subclause of UL 60335-1 is not mentioned in UL 60335-2-34, the UL 60335-1 subclause applies. NOVEMBER 3, 2017 CAN/CSA-C22.2 NO. 60335-2-34:17 UL 60335-2-34 6UL COPYRIGH
41、TED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Level of Harmonization This standard adopts the IEC text with national differences. This standard is published as an equivalent standard for CSA and UL. An equivalent standard is a standard that is substa
42、ntially the same in technical content, except as follows: a) Technical national differences are allowed for national differences resulting from conicts in codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental
43、 climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. b) Presentation is word for word except for editorial changes that do not alter the technical content of the standard. Examples of editorial ch
44、anges include: 1) different font sizes, gure sizes, and table sizes; 2) minor variations in format, such as indentation and pagination; 3) font appearance (including the use of italic or bold text or uppercase or lowercase letters); 4) the use of a symbol (e.g., A or %) rather than the word (Ampere
45、or percent), or the word rather than the symbol; 5) inclusion of inch-pound units for informational purposes; 6) corrections of misprints or typographical errors; 7) bilingual column headings or gure captions on a common table or gure in a bilingual edition; 8) change from rst-angle to third-angle d
46、rawing; 9) addition of a statement: “This is a rst-angle drawing”; and 10) substitution of a point (.) for a comma (,) as the decimal marker. All national differences from the IEC text are included in the CSA Group and UL versions of the standard. While the technical content is the same in each orga
47、nizations version, the format and presentation may differ. Reasons for Differences From IEC Differences from the IEC are being added in order to address safety and regulatory situations present in the US and Canada. NOVEMBER 3, 2017 CAN/CSA-C22.2 NO. 60335-2-34:17 UL 60335-2-34 7UL COPYRIGHTED MATER
48、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the pro
49、cedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. IEC Copyright For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication 60335-2-34, Household and Similar Electrical Appliances Safety Part 2-34: P
