1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60384-14 Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional Specication: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply MainsUL C
2、OPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional Specication: Fixed Capa
3、citors for Electromagnetic Interference Suppression and Connection to the Supply Mains, UL 60384-14 Second Edition, Dated July 11, 2014 Summary of Topics UL 60384-14 is an adoption of IEC 60384-14, Safety Requirements for Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional Specicatio
4、n: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains (Fourth Edition, issued June, 2013). Please note that the National Difference document incorporates all of the U.S. national differences for UL 60384-14. The revised requirements are substantially in
5、accordance with Proposal(s) on this subject dated March 7, 2014 and May 23, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior perm
6、ission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar dam
7、ages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever excee
8、d the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resul
9、ting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective da
10、tes as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JULY 11, 2014 UL 60384-14 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUC
11、TION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 11, 2014 UL 60384-14 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 11, 2014 1 UL 60384-14 Safety Requirements for Fixed Capacitors for Use in Electronic Equi
12、pment Part 14: Sectional Specication: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains First Edition April, 2009 Second Edition July 11, 2014 This ANSI/UL Standard for Safety consists of the Second Edition. The most recent designation of ANSI/UL 60384-
13、14 as an American National Standard (ANSI) occurred on July 11, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-bas
14、ed standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a
15、 printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 60384-14-2014UL COPYRIGHTED MAT
16、ERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 11, 2014 UL 60384-14 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface (UL) 6 NATIONAL DIFFERENCES .7 FOREWORD
17、 8 1 General .10 1.1 Scope 10 1.2 Object .10 1.3 Normative references 10 1.4 Information to be given in a detail specication 11 1.5 Terms and denitions 13 1.6 Marking 21 1.7 Classication of Class X and Class Y capacitors 22 2 Preferred ratings and characteristics .26 2.1 Preferred characteristics 26
18、 2.2 Preferred values of ratings 26 2.3 Requirements for sleeving, tape, tubing and wire insulation .28 3 Assessment procedures 28 3.1 Primary stage of manufacture .28 3.2 Structurally similar components .28 3.3 Certied records of released lots 28 3.4 Approval testing .28 3.5 Quality conformance ins
19、pection .39 4 Test and measurement procedures 42 4.1 Visual examination and check of dimensions .43 4.2 Electrical tests 44 4.3 Robustness of terminations .48 4.4 Resistance to soldering heat 49 4.5 Solderability 49 4.6 Rapid change of temperature .50 4.7 Vibration .50 4.8 Bump 51 4.9 Shock 52 4.10
20、Container sealing .53 4.11 Climatic sequence 53 4.12 Damp heat, steady state 55 4.13 IMPULSE VOLTAGE .56 4.14 Endurance 58 4.15 Charge and discharge 61 4.16 Radiofrequency characteristics .63 4.17 PASSIVE FLAMMABILITY test 63 4.18 ACTIVE FLAMMABILITY test .64 4.19 Component solvent resistance (if ap
21、plicable) 67 4.20 Solvent resistance of the marking 67 JULY 11, 2014 UL 60384-14 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex A (normative) Circuit for the IMPULSE VOLTAGE test Annex B (normative) Circuit for the endurance test Ann
22、ex C (normative) Circuit for the charge and discharge test Annex D (normative) Declaration of design (condential to the manufacturer and the certication body) Annex E (informative) Pulse test circuits Annex F (normative) Particular requirements for safety test of surface mounting capacitors F.1 Gene
23、ral .76 F.2 Test and measurement procedures .76 Annex G (informative) Capacitance ageing of xed capacitors of ceramic dielectric, Class 2 G.1 Overview .79 G.2 Law of capacitance ageing 79 G.3 Capacitance measurements and capacitance tolerance 80 G.4 Special preconditioning .81 JULY 11, 2014 UL 60384
24、-14 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 11, 2014 UL 60384-14 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard is
25、based on IEC Publication 60384-14: Fourth Edition, Safety Requirements for Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional Specication: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains. IEC publication 60384-14 is copyrighted by the
26、 IEC. This is the UL Standard for Safety for Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional Specication: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains. The text, gures and tables of IEC publication 60384-14, Safety Requirements
27、for Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional Specication: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains copyright June, 2013 are used in this Standard with the consent of the IEC and the American National Standards Institu
28、te (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purpos
29、es only. Copies of IEC Publication 60384-14 may be purchased from ANSI, 11 West 42 nd Street, New York, New York, 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of
30、the Standard to judge its suitability for their particular purpose. These materials are subject to copyright claims of IEC, ANSI, and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All such requests
31、 pertaining to the ANSI/UL 60384-14 Standard should be submitted to UL. The previous version of UL 60384-14 included national differences to the following IEC requirements: Clauses 2.26, 2.3, 4.14.1 and 4.17. These national differences were deleted in this version of UL 60384-14. UL Effective Date T
32、he effective date for UL 60384-14, Second Edition is July 11, 2014 JULY 11, 2014 UL 60384-14 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES There are ve types of National Differences as noted below. The difference type
33、 is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which are based on basic safety principles an
34、d requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical substantiation (for the IEC or national re
35、quirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE These are National Differences based o
36、n editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: Addition / Add - An addition entails ad
37、ding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or deletion of certain words or the repl
38、acement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. JULY 11, 2014 UL 60384-14 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED
39、FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 14: Sectional Specication: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains FOREWORD 1)
40、The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical
41、and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical commit
42、tees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for S
43、tandardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee ha
44、s representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accura
45、te, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional
46、 publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity w
47、ith an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any perso
48、nal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative refe
49、rences cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-14 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This
