1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-14 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric ActuatorsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION
2、OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators, UL 6073
3、0-2-14 Second Edition, Dated February 27, 2013 Summary of Topics These revisions are being issued to reect the established effective date for UL 60730-2-14. AS OF OCTOBER 19, 2018, THE FIRST EDITION OF UL 60730-2-14 AND THE TWELFTH EDITION OF UL 873 WILL BE WITHDRAWN AND WILL BE REPLACED BY THIS STA
4、NDARD. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechani
5、cal photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any
6、 special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damag
7、e. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, cl
8、aim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/
9、or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. The following table lists th
10、e future effective dates with the corresponding reference. MAY 28, 2014 UL 60730-2-14 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Future Effective Date Reference October 19, 2018 Second Edition MAY 28, 2014 UL 60730-2-14 tr2UL COPYRIG
11、HTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 27, 2013 (Title Page Reprinted: May 28, 2014) 1 UL 60730-2-14 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators Pri
12、or to the rst edition of UL 60730-2-14, the requirements for the products covered by this Standard were included in UL 8730-2-14. First Edition February, 2002 Second Edition February 27, 2013 This ANSI/UL Standard for Safety consists of the Second Edition including revisions through February 27, 201
13、3. The most recent designation of ANSI/UL 60730-2-14 as an American National Standard (ANSI) occurred on February 27, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. The National Difference Page and IEC Forewo
14、rd are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs
15、 Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LAB
16、ORATORIES INC. ANSI/UL 60730-2-14-2013UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 27, 2013 UL 60730-2-14 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FR
17、OM UL CONTENTS Preface (UL) 6 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope and normative references .11 2 Denitions 12 2.2 Denitions of types of control according to purpose 12 2.3 Denitions relating to the function of controls .13 2.13 Miscellaneous denitions 13 3 General requirements 13 4 General no
18、tes on tests .13 5 Rating 13 6 Classication 13 6.1 According to nature of supply .13 6.3 According to their purpose 14 6.4 According to features of AUTOMATIC ACTION .14 6.11 According to number of automatic cycles (A) of each AUTOMATIC ACTION .15 7 Information 15 8 Protection against electric shock
19、.16 9 Provision for protective earthing .16 10 Terminals and TERMINATIONS .16 11 Constructional requirements 16 11.4 Actions 16 12 Moisture and dust resistance .17 13 Electric strength and insulation resistance .17 14 Heating 17 15 MANUFACTURING DEVIATION and DRIFT 18 16 Environmental stress 18 17 E
20、ndurance .18 17.4 Manual and mechanical conditions for the tests 18 17.6 Not applicable. .19 18 Mechanical strength .19 19 Threaded parts and connections 19 20 CREEPAGE DISTANCES, CLEARANCES and distances through solid insulation 19 21 Resistance to heat, re and tracking 19 22 Resistance to corrosio
21、n 19 23 Electromagnetic compatibility (EMC) requirements Emission .19 24 Components .19 25 Normal OPERATION 19 26 Electromagnetic compatibility (EMC) requirements Immunity .19 27 Abnormal OPERATION .20 27.2 Blocked output test (temperature) 20 27.3 Not applicable. .21 28 Guidance on the use of elect
22、ronic disconnection .21 FEBRUARY 27, 2013 UL 60730-2-14 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Figures Annexes Annex D (informative) Heat, re and tracking (applicable in Canada and the USA) D.2 Polymeric materials used for enclosur
23、es for portable, stationary and xed controls 23 Annex H (normative) Requirements for ELECTRONIC CONTROLS H.11 Constructional requirements .24 H.26.1 Addition: 24 H.26.5 Voltage dips and voltage interruptions in the power supply network 24 H.26.6 Not applicable. .25 H.26.8 Surge immunity test 25 H.26
24、.9.3 Test procedure .25 H.26.10 Ring wave test 26 H.26.13 Test of inuence of supply frequency variations .26 H.26.14 Power frequency magnetic eld immunity test 26 H.26.15.4 .27 ANNEX DVC Markings FEBRUARY 27, 2013 UL 60730-2-14 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DIST
25、RIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 27, 2013 UL 60730-2-14 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard, UL 60730-2-14, Standard for Automatic Electrical Controls for Household
26、and Similar Use; Part 2: Particular Requirements for Electric Actuators, is to be used in conjunction with UL 60730-1. The requirements for electric actuators are contained in this part 2 standard and UL 60730-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60730-
27、1. Where a particular subclause of UL 60730-1 is not mentioned in UL 60730-2-14, the UL 60730-1 subclause applies. The text, gures and tables of the IEC Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators, 60730-2-14, copyr
28、ight 1995 as amended in 2001 and 2007 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC
29、material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 60730-2-14 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, NY 10036, (212) 642-4900. Note Although the inten
30、ded primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. These materials are subject to copyright claims of IEC and UL. No part of this publication m
31、ay be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the UL 60730-2-14 standard should be submitted to UL. UL effective date The effective date for UL 60730-2-14, second edition, is October 19, 2018. A UL effec
32、tive date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. MAY 28, 2014 UL 60730-2-14 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from
33、the text of International Electrotechnical Commission (IEC) Publication 60730-2-14, Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators, copyright 2007, are indicated by notations (differences) and are presented in bold text. There are
34、ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These ar
35、e National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements based on existing safety practices. These requirements reect national safety p
36、ractices, where empirical substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with t
37、he IEC component standard. DE These are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be a
38、pplied to the base IEC text: Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such a
39、s the addition, replacement or deletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text
40、. FEBRUARY 27, 2013 UL 60730-2-14 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2: Particular requirements for electric actuators F
41、OREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in
42、the electrical and electronic elds. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internatio
43、nal, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form
44、al decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) IEC Publications have the form of recommendation for
45、 international use published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unication, IEC National Committees undertake to apply IEC International Standards transparently to the maximum exten
46、t possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipmen
47、t declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC N
48、ational Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attentio
49、n is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60730-2-14 has been prepared by IEC technical committee 72: Automatic controls for household us
