1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 60745-2-22Hand-Held Motor-Operated Electric Tools - Safety - Part 2-22: Particular Requirements ForCut-Off MachinesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER RE
2、PRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 60745-2-22Hand-Held Motor-Operated Electric Tools - Safety - Part 2-22: Particular Requirements For Cut-OffMachinesEdition: 1Edition Date: July 20, 2012The revisions dated June 19, 2014 were issued to adopt the following
3、changes in requirementsand to reflect the latest ANSI approval date of June 19, 2014.1. RevisionsTo Clause 8.1DV To Allow For The Use Of Alternative Marking For Cut-OffMachines With A Permanently Fixed GuardThis document provides a single listing of the National Differences included in the UL adopti
4、on ofthe corresponding IEC standard.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.UL provides this standards document
5、 as is without warranty of any kind, either expressed or implied,including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost sa
6、vings, loss of data, or any other damages arising out of the use of or theinability to use this standards document, even if UL or an authorized UL representative has been advisedof the possibility of such damage. In no event shall ULs liability for any damage ever exceed the pricepaid for this stand
7、ards document, regardless of the form of the claim.Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold ULharmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonableattorneys fees) resulting from any error or d
8、eviation introduced while purchaser is storing an electronicStandard on the purchasers computer system.Copyright Underwriters Laboratories Inc.JUNE 19, 2014NATIONAL DIFFERENCES FOR UL UL 60745-2-222UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM
9、 ULPrefaceThis document provides a single listing of the technical National Differences included in the UL adoptionof the corresponding IEC standard.In its IEC-based standards, UL uses the notations indicated below to identify national difference type, andthese types are additionally noted in this d
10、ocument. The standard may not use all types of thesedeviations.D1 - These are deviations which are based on basic safety principles and requirements, elimination ofwhich would compromise safety for U.S. consumers and users of products.D2 - These are deviations based on safety practices. These are de
11、viations for IEC requirements that maybe acceptable, but adopting the IEC requirements would require considerable retesting or redesign on themanufacturers part.DC - These are deviations based on the component standards and will not be deleted until a particularcomponent standard is harmonized with
12、the IEC component standard.DE - These are deviations based on editorial comments or corrections.DR - These are deviations based on the national regulatory requirements.Each national difference contains a description of what the national difference entails. Typically one of thefollowing words is used
13、 to explain how the text of the national difference is to be applied to the base IECtext:Addition / Add - An addition entails adding a complete new numbered clause, subclause, table,figure, or annex. Addition is not meant to include adding select words to the base IEC text.Deletion / Delete - A dele
14、tion entails complete deletion of an entire numbered clause, subclause,table, figure, or annex without any replacement text.Modification / Modify - A modification is an altering of the existing base IEC text such as theaddition, replacement or deletion of certain words or the replacement of an entir
15、e clause,subclause, table, figure, or annex of the base IEC text.JUNE 19, 2014 NATIONAL DIFFERENCES FOR UL UL 60745-2-22 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences8.1DV D1 Modification by adding the following to Clau
16、se 8.1 of this Part 2:WARNING To reduce the risk of injury, use proper guard and use only accessories rated atleast equal to the maximum speed marked on the tool.In Canada, the equivalent French wording is as follows: “AVERTISSEMENT Pour rduire lerisque de blessure, utiliser un carter appropri et un
17、iquement les accessoires convenantau moins la vitesse maximale indique sur loutil.”For cut-off machines with a permanently fixed guard, the following alternative warning maybe used:WARNING To reduce the risk of injury, use only accessories rated at least equal to themaximum speed marked on the tool.
18、In Canada, the equivalent French wording is as follows: “AVERTISSEMENT Pour rduire lerisque de blessure, utiliser uniquement les accessoires convenant au moins la vitessemaximale indique sur loutil.”If the above cautionary markings are included as part of a list of cautionary markings, thewords WARNING To reduce the risk of injury need not be repeated.JUNE 19, 2014NATIONAL DIFFERENCES FOR UL UL 60745-2-224
