1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 62275 Cable Management Systems Cable Ties for Electrical Installations STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION F
2、ROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Cable Management Systems Cable Ties For Electrical Installations, UL 62275 Second Edition, Dated October 14, 2016 Summary of Topics This is the second edition o
3、f ANSI/UL 62275. The requirements are substantially in accordance with Proposal(s) on this subject dated May 29, 2015 and December 18, 2015. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanic
4、al photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any
5、special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage
6、. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, cla
7、im, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. OCTOBER 14, 2016 UL 62275 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WIT
8、HOUT PERMISSION FROM UL OCTOBER 14, 2016 UL 62275 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-623-ANCE Second Edition CSA Group CAN/CSA-C22.2 No. 62275:16 Secon
9、d Edition Underwriters Laboratories Inc. UL 62275 Second Edition Cable Management Systems Cable Ties for Electrical Installations October 14, 2016 This national standard is based on publication IEC 62275, Second edition (2013) ANSI/UL 62275-2016 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR
10、FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or
11、proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL will issue revisions to this standar
12、d by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2016 Rights reserved in favor of ANCE. ISBN 978-1-4883-0002-8 20
13、16 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate comm
14、ittee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purch
15、ase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2016 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be
16、 altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Second Edition. The most recent designation of ANSI/UL 62275 as an American National Sta
17、ndard (ANSI) occurred on October 12, 2016. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposal
18、s for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL
19、COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 5 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope 10 2 Normative references .10 3 Terms and denitions 12 4 General requirements 13 5 General notes on tests .14 6 Classication 19 6.1 Ac
20、cording to material 19 6.2 According to loop tensile strength for cable ties and mechanical strength for xing devices 19 6.3 According to temperature .21 6.4 According to contribution to re for non-metallic and composite cable ties only 22 6.5 According to environmental inuences .22 7 Marking and do
21、cumentation .23 8 Construction .26 9 Mechanical properties 28 9.1 Requirements .28 9.2 Installation test 31 9.3 Minimum installation temperature test for cable ties 31 9.4 Minimum operating temperature test for cable ties .31 9.5 Loop tensile strength test for cable ties classied according to 6.2.2
22、.34 9.6 Loop tensile strength test for cable ties classied according to 6.2.3 .35 9.7 Mechanical strength test for xing devices 40 10 Contribution to re 49 11 Environmental inuences 53 11.1 Resistance to ultraviolet light 53 11.2 Resistance to corrosion .57 12 Electromagnetic compatibility .59 13DV
23、Smoke and heat release test 59 ANNEX A (normative) Compliance checks to be carried out for cable ties and xing devices complying with IEC 62275:2006 ANNEX DVB (Normative) Adhesives DVB.1 Scope .63 DVB.2 Requirements 63 DVB.3 Method general .63 DVB.4 As-received test 64 DVB.5 Effect of temperature .6
24、5 DVB.6 Effect of humidity .67 DVB.7 Effect of cold .67 DVB.8 Effect of cyclic conditions 67 OCTOBER 14, 2016 NMX-J-623-ANCE CAN/CSA-C22.2 NO. 62275:16 UL 62275 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL DVB.9 Other test considerations
25、 68 ANNEX DVC (Normative) Smoke and heat release test DVC.1 Scope 69 DVC.2 Apparatus .69 DVC.3 Pretest Calibration 79 DVC.4 Test Specimens 80 DVC.5 Test Procedure 80 DVC.6 Calculations .81 DVC.7 Report 86 ANNEX DVD (Informative) Substitution of materials DVD.1 Normative references .87 DVD.2 Criteria
26、 for substitution of materials .87 ANNEX DVE (Informative) Polymeric material modications DVE.1 Regrind material 88 DVE.2 Additives used in the moulding process .88 DVE.3 Blending materials 89 ANNEX DVF (Normative) Tests for polymer identication DVF.1 Normative references .90 DVF.2 Infrared spectros
27、copy .90 DVF.3 Thermogravimetry 92 DVF.4 Differential scanning calorimetry 93 ANNEX DVG (Informative) Index of requirements by type ANNEX DVH (Informative) Classications worksheet (Canada and the United States) ANNEX DVI (Normative) Mexican Normative References Bibliography OCTOBER 14, 2016 NMX-J-62
28、3-ANCE CAN/CSA-C22.2 NO. 62275:16 UL 62275 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the harmonized ANCE, CSA Group, and UL standard for Cable Management Systems Cable Ties for Electrical Installations. It is the secon
29、d edition of NMX-J-623-ANCE, the second edition of CAN/CSA-C22.2 No. 62275, and the second edition of UL 62275. This edition of NMX-J-623-ANCE supersedes the previous edition published in 2010. This edition of CAN/CSA-C22.2 No. 62275 supersedes the previous edition published in 2010. This edition of
30、 UL 62275 supersedes the previous edition published on February 26, 2010. This harmonized standard is an adoption, with national differences, of the identically titled IEC (International Electrotechnical Commission) Standard IEC 62275 (second edition, 2013-11). IEC publication 62275 is copyrighted b
31、y the IEC. This harmonized standard was prepared by the Association of Standardization and Certication (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the CANENA Technical Harmonization Subcommittee 23A-62275 are gratefully acknowledged. This Standard is consid
32、ered suitable for use for conformity assessment within the stated scope of the Standard. The present Mexican Standard was developed by the CT PIE-A from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the collaboration of the manufacturers and users.
33、This standard was reviewed by the CSA Integrated Committee on Fittings, Hardware, and Positioning Devices, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CS
34、A Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada (SCC). This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a
35、 specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability
36、 for their particular purpose. Level of harmonization This standard adopts the IEC text with national differences. This standard is published as an equivalent standard for ANCE, CSA Group, and UL. OCTOBER 14, 2016 NMX-J-623-ANCE CAN/CSA-C22.2 NO. 62275:16 UL 62275 5UL COPYRIGHTED MATERIAL NOT AUTHOR
37、IZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being
38、 in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. All natio
39、nal differences from the IEC text are included in the ANCE, CSA Group, and UL versions of the standard. While the technical content is the same in each organizations version, the format and presentation may differ. Reasons for differences from IEC This standard adopts the IEC text with national diff
40、erences. Throughout the standard, national differences have been identied for the countries to which they apply. These differences are necessary in order to maintain compliance with existing nationally based codes and regulations, or to take into account essential safety practices or market based pr
41、eferences. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one in
42、terpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. IEC Copyright For ANCE, the text, gures, and tables of International Electrotechnical Commission Publication 62
43、275, Cable management systems Cable ties for electrical installations, copyright 2013, are used in this standard according to the guidelines provided in the ISO/IEC/POCOSA. For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication 62275, Cable management sys
44、tems Cable ties for electrical installations, copyright 2013, are used in this standard with the consent of the International Electrotechnical Commission. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. For UL, the text, gures and ta
45、bles of IEC publication 62275, Cable management systems Cable ties for electrical installations, copyright 2013 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI
46、 should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. Copies of IEC Publication 62275 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York,
47、 New York, 10036, (212) 642- 4900. OCTOBER 14, 2016 NMX-J-623-ANCE CAN/CSA-C22.2 NO. 62275:16 UL 62275 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES National Differences from the text of International Electrotechnical
48、 Commission (IEC) Publication 62275, Cable management systems Cable ties for electrical installations, second edition (2013-11), are indicated by notations (differences) and are presented in bold text. There are ve types of National Differences as noted below. The difference type is noted on the rst
49、 line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements
