1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 92Fire Extinguisher and BoosterHoseUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER R
2、EPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Fire Extinguisher and Booster Hose, UL 92Tenth Edition, Dated July 27, 1993Revisions: This Standard contains revisions through and including J
3、uly 2, 2008.Summary of TopicsThis revision to UL 92 is to remove the ANSI approval on the title page.UL Standards for Safety are developed and maintained in the Standard Generalized Markup Language(SGML). SGML - an international standard (ISO 8879-1986) - is a descriptive markup language thatdescrib
4、es a documents structure and purpose, rather than its physical appearance on a page. Due toformatting differences resulting from the use of ULs new electronic publishing system, please note thatadditional pages (on which no requirements have been changed) may be included in revision pages dueto relo
5、cation of existing text and reformatting of the Standard.Text that has been changed in any manner is marked with a vertical line in the margin. Changes inrequirements are marked with a vertical line in the margin and are followed by an effective date noteindicating the date of publication or the dat
6、e on which the changed requirement becomes effective.The revisions dated July 2, 2008 include a reprinted title page (page1) for this Standard.The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard
7、, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the official document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if ther
8、e are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Sta
9、ndards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying,
10、 recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or i
11、mplied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.JULY 2, 2008 UL 92 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULIn no event will UL be liable for any special, incidental, conseque
12、ntial, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall ULs liabil
13、ity for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolv
14、e everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file
15、types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, clai
16、m, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk
17、 of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version elect
18、ronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended f
19、or on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user vers
20、ion of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purcha
21、sing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indi
22、cated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective dateare located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will b
23、e judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compli
24、ance with all the requirements in thisStandard will be required as a condition of continued Listing, Recognition, and Follow-Up Services afterthe effective date, and understanding of this should be signified in writing.Copyright 2008 Underwriters Laboratories Inc.JULY 2, 2008 UL 92tr2UL COPYRIGHTED
25、MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis Standard consists of pages dated as shown in the following checklist:Page Date1-2AJuly 2, 20082B-3 February 29, 20004.July 2, 20085July 27, 19936-7July 24, 19968-9February 29, 200010-14B July 24, 199616.Ju
26、ly 27, 199318.July 24, 1996JULY 2, 2008 UL 92 tr3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULJULY 2, 2008 UL 92tr4No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL
27、July 27, 1993(Title Page Reprinted: July 2, 2008)1UL 92Standard for Fire Extinguisher and Booster HoseThe First through Fifth editions were titled Chemical Engine Hose.First Edition June, 1948Second Edition March, 1949Third Edition May, 1954Fourth Edition January, 1969Fifth Edition August, 1972Sixth
28、 Edition June, 1975Seventh Edition November, 1977Eighth Edition April, 1980Ninth Edition April, 1988Tenth EditionJuly 27, 1993An effective date included as a note immediately following certain requirementsis one established by Underwriters Laboratories Inc.Revisions of this Standard will be made by
29、issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised requirements. Comments or proposalsfor revisions on any p
30、art of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-LineCollaborative Standards Development System (CSDS) at http:/.COPYRIGHT 1973, 2008 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORD
31、ISTRIBUTION WITHOUT PERMISSION FROM ULJULY 2, 2008FIRE EXTINGUISHER AND BOOSTER HOSE - UL 922No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .52 General 52.1 Units of Measurement .52.2 References
32、 5CONSTRUCTION3 Types .54 Tube and Cover 54.1 General .54.2 Thicknesses .65 Reinforcement 65.1 Wrapped Type .65.2 Braided and Spiraled Type 66 Internal Diameter .67 Couplings 7PERFORMANCE8 Elongation and Contraction Test 78.1 General .78.2 Apparatus .78.3 Method 79 Twist Test 79.1 General .79.2 Appa
33、ratus .89.3 Method 810 Kink Test .810.1 General 810.2 Apparatus 810.3 Method .811 Proof Pressure Test 911.1 General 911.2 Apparatus 911.3 Method .912 Hydrostatic Strength Test .912.1 General 912.2 Apparatus 912.3 Method .913 Adhesion Test 1013.1 General .1013.2 Apparatus .1013.3 Method .1014 Tensile
34、 Strength and Elongation Test of Tube and Cover 1014.1 General .1014.2 Apparatus .10JULY 2, 2008 FIRE EXTINGUISHER AND BOOSTER HOSE - UL 92 2AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL14.3 Method .1115 Accelerated Air-Oven Aging Test .11
35、15.1 General .1115.2 Apparatus .1115.3 Method .1116 Water Immersion Test .1116.1 General .1116.2 Apparatus .1216.3 Method .1217 Ozone Exposure Test .1217.1 General .1217.2 Apparatus .1217.3 Method .1218 Low Temperature Test 1218.1 General .1218.2 Apparatus .1318.3 Method .1319 Coupling Retention Tes
36、t .1319.1 General .1319.2 Apparatus .1319.3 Method .1320 Pull Test .1320.1 General .1320.2 Apparatus .1320.3 Method .1421 Mercurous Nitrate Immersion Test 1421A Moist Ammonia-Air Stress Cracking Test .1421A.1 General 1421A.2 Apparatus 1421A.3 Method 1422 Salt-Spray Corrosion Test 14A22.1 General 14A
37、22.2 Apparatus 14B22.3 Method 14BMANUFACTURING AND PRODUCTION TESTS23 General 14BMARKING24 General 14BFEBRUARY 29, 2000FIRE EXTINGUISHER AND BOOSTER HOSE - UL 922BUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULFEBRUARY 29, 2000 FIRE EXTINGUIS
38、HER AND BOOSTER HOSE - UL 92 3No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis page intentionally left blank.JULY 2, 2008FIRE EXTINGUISHER AND BOOSTER HOSE - UL 924UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPR
39、ODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover fire extinguisher and booster hose with or without couplings attached, insizes of 3/8 inch (9.5 mm) up to and including a nominal internal diameter of 1-1/2 inches (38.1 mm) foruse on portable, wheeled,
40、 and stationary fire extinguishers, and also as booster hose on fire apparatus.This hose is intended for use at maximum working pressure of 200, 250, 400, 600, 800, 1000, or 1250psig (1.38, 1.72, 2.76, 4.14, 5.52, 6.90, or 8.62 MPa).1.1 revised July 27, 19931.2 These requirements also cover hose for
41、 use on fire extinguishers requiring characteristics forlow-temperature flexibility at minus 54C (minus 65F).1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those in use when the standard was developed, and that involves a risk of fire, e
42、lectric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the level of safety for the user of the product asoriginally anticipated by the intent of this standard.2 General2.1 Units of Measurement2.
43、1.1 If a value for measurement is followed by a value in other units in parentheses, the second valuemay be only approximate. The first stated value is the requirement.2.2 References2.2.1 Any undated reference to a code or standard appearing in the requirements of this standard shallbe interpreted a
44、s referring to the latest edition of that code or standard.CONSTRUCTION3 Types3.1 Fire extinguisher and booster hose shall be the wrapped, braided, or spiraled type.3.2 All hose shall consist of a rubber tube, a reinforcement of cotton or synthetic fibers or corrosionresistant material such as stain
45、less steel, and a rubber cover.4 Tube and Cover4.1 General4.1.1 The tube or lining and cover of a hose shall be made from natural rubber, synthetic rubber, or both,which is referred to hereafter as rubber.4.1.2 A tube and a cover shall be of uniform thickness, and free from pitting, blisters, or oth
46、erimperfections that would impair its intended use. This requirement is not intended to exclude the use ofa corrugated cover or wrapped cover finish.4.1.3 Intentional pricking of the cover is acceptable.JULY 27, 1993 FIRE EXTINGUISHER AND BOOSTER HOSE - UL 92 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED
47、FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL4.2 Thicknesses4.2.1 The thickness of a tube shall not be less than 0.060 inch (1.52 mm), and that of a cover not lessthan 0.047 inch (1.19 mm), when determined in accordance with 4.2.2 4.2.5.4.2.2 For buffing off irregularities in th
48、e sample, the buffing machine specified in the RecommendedPractice for Rubber-Preparation of Pieces for Test Purposes from Products, ASTM D318384 (1992), isto be used. The dial micrometer specified in the Test Methods for Rubber Properties in Tension, ASTMD41292, is to be used for measuring thicknes
49、s.4.2.2 revised July 24, 19964.2.3 One piece, approximately68inches (152 203 mm) long, taken from the sample selected forphysical and detail tests, is to be used in determining the thickness of the lining and cover in accordancewith 4.2.4 and 4.2.5.4.2.4 A strip, approximately68inches (152 203 mm) long and 1 inch (25 mm) wide, or as close to1 inch wide as possible from small diameter hose, is to be cut from the hose, and the rubber partseparated from the plies. If
