UNE 102-039-1985 《灰泥和石膏建造 海岸硬度C和布氏硬度的确定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 6179-2010 en Rubber vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)《硫化.pdf

EN ISO 6179-2017 en Rubber vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique).pdf

EN ISO 6185-1-2001 en Inflatable Boats - Part 1 Boats with a Maximum Motor Power Rating of 4 5 kW《充气艇 第1部分 最大电动机功率为4 5KW的小艇 ISO 6185-1-2001》.pdf

EN ISO 6185-2-2001 en Inflatable Boats - Part 2 Boats with a Maximum Motor Power Rating of 4 5 kW to 15 kW Inclusive《充气艇 第2部分 最大电动机功率为4 5KW至15KW的小艇 含ISO 6185-2-2001》.pdf

EN ISO 6185-3-2014 en Inflatable boats - Part 3 Boats with a hull length less than 8 m with a motor rating of 15 kW and greater《充气艇 第3部分 全长小于8米且额定功率在15千瓦或高于15千瓦的充气艇(ISO 6185-3 2014.pdf

EN ISO 6185-4-2011 en Inflatable boats - Part 4 Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater《充气艇 第4部分 船体长度在8 m和24 m之间 电机额定功率为15 k.pdf

EN ISO 6186-1998 en Plastics - Determination of Pourability《塑料 浇注性的测定 ISO 6186-1998》.pdf

EN ISO 62-2008 en Plastics - Determination of water absorption《塑料 吸水性的测定》.pdf

EN ISO 6218-2015 en Inland navigation vessels - Manually-and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimensions《内河航行船舶 .pdf