UNE 104-281 Pt 3-2-1986 《沥青材料和改性沥青乳液的试验方法 含水率》.pdf

相关资源

JT T 971-2015 沥青加铺层用聚合物改性沥青抗裂贴.pdf

JC T 1067-2008 坡屋面用防水材料聚合物改性沥青防水垫层.pdf

JC T 1076-2008 胶粉改性沥青玻纤毡与玻纤网格布增强防水卷材.pdf

JC T 1077-2008 胶粉改性沥青玻纤毡与聚乙烯膜增强防水卷材.pdf

JC T 1078-2008 胶粉改性沥青聚酯毡与玻纤网格布增强防水卷材.pdf

JC T 2046-2011 改性沥青防水卷材成套生产设备 通用技术要求.pdf

JC T 974-2005 道桥用改性沥青防水卷材.pdf

SH T 0738-2003 聚合物改性沥青1,1,1-三氯乙烷溶解度测定法.pdf

SH T 0740-2003 聚合物改性沥青离析试验法.pdf

NB-SH T 0821-2010 路用阻燃改性沥青.pdf

猜你喜欢

FORD WSS-M4G261-B3-1996 SEALER BUTYL RUBBER SOLVENT FREE《无溶剂型丁基橡胶密封剂》.pdf

FORD WSS-M4G265-B-2003 SEALER PVC SOLVENT FREE AIRLESS SPRAYABLE LOW TEMPERATURE TO BE USED WITH FORD WSS-M99P1111-A 《低温条件用无气可喷施的无溶剂型聚氯乙烯（PVC）密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4G278-B3-1997 SEALER GASKET FOAM-IN-PLACE NITROGEN EXPANDING THERMOSETTING EXTERIOR《汽车外部用热固现场发泡氮膨胀型密封剂 垫片》.pdf

FORD WSS-M4G295-A-2011 SEALER POLYVINYL CHLORIDE (PVC) SPRAYABLE PRIMER OVEN CURING CHIP RESISTANT IMPROVED PAINTABILITY TO BE USED WITH FORD WSS-M99P1111-A 《可喷射底漆炉内固化抗剥落的有改善的可涂装.pdf

FORD WSS-M4G295-A-2016 SEALER POLYVINYL CHLORIDE (PVC) SPRAYABLE PRIMER OVEN CURING CHIP RESISTANT IMPROVED PAINTABILITY TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G318-A-2011 COATING POLYVINYL CHLORIDE (PVC) SPRAYABLE PRIMER OVEN CURING CHIP RESISTANT IMPROVED PAINTABILITY TO BE USED WITH FORD WSS-M99P1111-A 《可喷射底漆炉内固化抗剥落的有改善的可涂.pdf

FORD WSS-M4G318-A-2018 COATING POLYVINYL CHLORIDE (PVC) SPRAYABLE PRIMER OVEN CURING CHIP RESISTANT IMPROVED PAINTABILITY TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G320-A4-1997 SEALER SILICONE RUBBER OXIME CURED LOW VISCOSITY《低粘度肟固化硅橡胶密封剂》.pdf

FORD WSS-M4G323-A10-2006 SEALANT SILICONE RUBBER ALKOXY CURED HIGH VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A 《高粘度烷氧基硫化硅橡胶密封剂(和FORD WSS-M99P1111-A一起使用)》.pdf