UNE 21-024 Pt 1-1984 《用非移动混合的渗透纸绝缘，额定电压在1 8 3kV和26 45kV的缆线 建设性数据》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE J 2826-2016 Snowmobile Probe Test for Contact with Power Driven Parts.pdf

SAE J 2828-2010 Off-Road Tire Fire Handling Guidelines《越野轮胎火灾处理指南》.pdf

SAE J 2828-2016 Off-Road Tire Fire Handling Guidelines.pdf

SAE J 2829-2011 Pedestrian Visibility Low Beam Optimization to Reduce Night-time Fatalities《减少夜间事故发生的步行者可见度车头灯短焦距光的最优化》.pdf

SAE J 2830-2008 Process for Comprehension Testing of In-Vehicle Icons《车辆内图标的理解力测试用规程》.pdf

SAE J 2830-2016 Process for Comprehension Testing of In-Vehicle Symbols.pdf

SAE J 2831-2012 Development of Design and Engineering Recommendations for In-Vehicle Alphanumeric Messages《车载字母数字信息的设计发展和工程建议》.pdf

SAE J 2832-2009 Welded Flash Controlled High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing Stress Relieved Annealed for Bending and Double Flaring《弯曲双扩口消除应力 .pdf

SAE J 2833-2009 Welded and Cold-Drawn High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing Stress Relieved Annealed for Bending and Flaring《弯曲双扩口消除应力 焊接冷拉高强度(6.pdf