UNE 25 114 h1 《铁路的压制，压制维修的端点》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 04-12-1967 Beam impact test for steel《钢梁冲击测试》.pdf

NC 04-13-1967 Modified Erichsen cupping test for steel and strip《钢丝和钢条的爱理逊压凹试验》.pdf

NC 04-14-1968 Reverse bend testing of steel wire《钢丝的反弯测试》.pdf

NC 04-15-1968 Simple torsión testing of steel wire《钢丝的扭曲简易测试》.pdf

NC 04-16-1968 Wrapping test for steel wire《钢丝的缠绕试验》.pdf

NC 04-17-1968 Bend test for steel《钢的弯曲测试》.pdf

NC 04-18-1968 Simple bending of steel Thickness less than 3 mm《厚度小于3mm的钢丝的弯曲测试》.pdf

NC 04-19-1968 Reverse bending of steel Thickness less than 3 mm《厚度小于3mm的钢丝的反弯测试》.pdf

NC 04-20-1968 Determination of total carbon in ferrous materials《含铁材料中含碳总量的确定》.pdf