UNE 28-597-1988 《空气和表面（联运）的一般负荷的集装箱 说明和试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D844-A1-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) MOLDING COMPOUND GENERAL PURPOSE GRADE TO BE USED WITH FORD WSS-M99P1111-A 《通用级聚苯醚+聚苯乙烯混合物成型料 与标准FORD W.pdf

FORD WSB-M4D844-A10-2010 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS) BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚苯乙烯（PPE+PS）吹塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D844-A11-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚苯乙烯（PPE+PS）混合物成型料 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSB-M4D844-A2-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D844-A1)《聚苯醚+聚苯乙烯+混合物(PPE+PS)成型.pdf

FORD WSB-M4D844-A3-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D844-A1)《聚苯醚+聚苯乙烯+混合物(PPE+PS)成型.pdf

FORD WSB-M4D844-A4-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D844-A1)《聚苯醚+聚苯乙烯混合物(PPE+PS)成型料 与标.pdf

FORD WSB-M4D844-A5-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D844-A1)《聚苯醚+聚苯乙烯+混合物(PPE+PS)成型.pdf

FORD WSB-M4D844-A6-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D844-A1)《聚苯醚+聚苯乙烯+混合物(PPE+PS)成型.pdf

FORD WSB-M4D844-A8-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚苯乙烯（PPE+PS）混合物成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf