UNE 30 127 《分析试剂 碘A 126 92》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4678-2015a Standard Practice for Rubber&x2014 Preparation Testing Acceptance Documentation and Use of Reference Materials《橡胶&x2014 制备 测试 验收 文档编制以及基准材料使用的标准实施规程》.pdf

ASTM D4679-2002(2007) Standard Specification for Rubber General Purpose Household or Beautician Gloves《一般用途、家用或护肤用橡胶手套的标准规范》.pdf

ASTM D4679-2002(2015)e1 Standard Specification for Rubber General Purpose Household or Beautician Gloves《一般用途 家用或护肤用橡胶手套的标准规格》.pdf

ASTM D4680-1998(2004) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《用压缩负荷静剪切法法测定胶粘剂蠕变和老化时间的标准试验方法(木材对木材)》.pdf

ASTM D4680-1998(2011) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《用压力负荷法(木材对木材)对胶粘剂静剪切的蠕变和破坏时间的标准试验方法》.pdf

ASTM D2557-1998(2017) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55 C (−450 to −67 F).pdf

ASTM D2680-2001(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping《丙烯腈-丁二烯-苯乙烯共聚物 (ABS) 和聚氯.pdf

ASTM D3596-2014 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins《通用聚氯乙烯 (PVC) 树脂中凝胶 (斑点) 测定的标准实施规程》.pdf

ASTM D3681-2012e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition.pdf