UNE 30 147 《分析试剂 草酸C2O4H2 2H2OM 126 07》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 7040-2012 en Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5 8 and 10《普遍定期转矩型六角螺母与非金属(插入) 房地产类5 8和10》.pdf

EN ISO 7042-2012 en Prevailing torque type all-metal hexagon high nuts - Property classes 5 8 10 and 12《的转矩型全金属六角高坚果 房地产类5 8 10和12》.pdf

EN ISO 7045-2011 en Pan head screws with type H or type Z cross recess - Product grade A《H型或Z型十字槽平头螺钉 产品等级A级》.pdf

EN ISO 7046-1-2011 en Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1 Steel of property class 4 8《H型或Z型十字槽沉头螺钉(通用头型) .pdf

EN ISO 7046-2-2011 en Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2 Steel screws of property class 8 8 stainless st.pdf

EN ISO 7047-2011 en Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A《H型或Z型十字槽沉头螺钉(通用头型) 产品等级A级》.pdf

EN ISO 7048-2011 en Cross-recessed cheese head screws《带十字槽的圆头螺钉》.pdf

EN ISO 7049-2011 en Cross-recessed pan head tapping screws《十字槽平头自攻螺钉》.pdf

EN ISO 7050-2011 en Cross-recessed countersunk (flat) head tapping screws《十字槽沉头(平头)自攻螺钉》.pdf