UNE 35-028 Pt 1-1986 《铁合金 硫含量的确定 第1部分：体积测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6524-2000(2011) 6250 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)《测量草皮增强垫(TRMs)弹性的标准试验方法》.pdf

ASTM D6525 D6525M-2014 7408 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products《测量成卷冲刷防护产品公称厚度的标准试验方法》.pdf

ASTM D6525 D6525M-2016 8320 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products《测量轧制防腐蚀产品公称厚度的标准试验方法》.pdf

ASTM D6525 D6525M-2017 red 3750 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products《测量轧制防腐蚀产品公称厚度的标准试验方法》.pdf

ASTM D6525 D6525M-2018 red 2500 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products《轧制侵蚀控制产品标称厚度测量的标准试验方法》.pdf

ASTM D6525-2000(2006) Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products《永久滚轧防腐蚀产品的标称厚度的测量的标准试验方法》.pdf

ASTM D6525-2012 8125 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products《测量成卷冲刷防护产品公称厚度的标准试验方法》.pdf

ASTM D6526-2003e1 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography《毛细管柱气象色谱法分析甲苯的标准试验方法》.pdf

ASTM D6526-2010 1875 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography《毛细管柱气相色谱法进行甲苯分析的标准试验方法》.pdf