UNE 38-318-1981 《锻造用的铝和铝合金 组（Al-Cu） 合金（L-3180和AL-2Cu Mg）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 2389-1975 Hydraulic pneumatic and lubricating systems Reduce tube connections with cut ring for Pn 40 MN m2(~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40MN m.pdf

TCVN 2390-1978 Hydraulic pneumatic and lubricating systems End tube connections with cut ring for Pn 40MN m2(~400Kgf cm2) Construction and basic dimensions 《液压气动和润滑系统 Pn为40MN m(~40.pdf

TCVN 2391-1978 Hydraulic pneumatic and lubricating systems Elbow passage tube connections with cut ring for Pn 40MN m2(~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为.pdf

TCVN 2392-1978 Hydraulic pneumatic and lubricating systems Elbow end tube connections with cut ring for Pn 40 MN m2(~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40M.pdf

TCVN 2393-1978 Hydraulic pneumatic and lubricating systems Elbow end with angle of 135o tube connections with cut ring for Pn 40 MN m2(~400Kgf cm2) Construction and basic dimension.pdf

TCVN 2394-1978 Hydraulic pneumatic and lubricating systems Tee passage tube connections with cut ring for Pn 40 MN m2(~400 Kgf cm2) Constructions and basic dimensions《液压气动和润滑系统 Pn为.pdf

TCVN 2395-1978 Hydraulic pneumatic and lubricating systems Tee reduce asymmetric tube connections with cut ring for Pn 40 MN m2(~400 Kgf cm2) Construction and basic dimensions《液压气动.pdf

TCVN 2397-1978 Hydraulic pneumatic and lubricating systems Tee end passage tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 P.pdf

TCVN 2398-1978 Hydraulic pneumatic and lubricating systems Tee and reduce tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn.pdf